785601

Mastervolt GPRS Module Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
EN / GPRS Module / January 2012 3
Configuration Description Range
General
Language Set the GPRS Module menu language See specifications
Device name Any name you wish with 12 characters max, default INT
MB GPRS
12 characters max
Network config
No SIM SIM card not detected
SIM Pin code See section 2.2, default 0000 Any four figures
Show credits Check box to show your SIM credits under each message.
Safe Numbers
Number 1 Maximum three numbers can be defined to be safe. The
module will only respond to these numbers (this number).
Refer to section 2.3.
Maximum 3 safe numbers
Number 2 Refer to Number 1
Number 3 Refer to Number 1
Allow Numbers Pass filter to accept the Safe Numbers and all numbers
starting with the figures in this field. For example +31 will
accept all Dutch numbers. If you do not fill in this field, only
the Safe Numbers will be accepted. Refer to section 2.3.
Maximum 12 digits,
see also section 2.3
Alarms
Transmit alarms Yes: send messages at the priority alarms (where the
MasterView Easy shows a pop up).
No: send no messages at alarms.
Telephone nr Phone number to send the alarm messages to. One 12 digit number,
see section 2.3
Shortcuts
Shortcut x Name of shortcut x, (x = 1-8). Refer to section 2.4 Maximum 16 characters
Message on event
Message x Message to be sent (x = 1-6). Refer to section 2.5 Maximum 16 characters
Message x tel. Phone number of message x, (x = 1-6). If “Filter numbers”
is enabled, a safe number must be selected.
One 12 digit number,
see section 2.3
2.2 SIM PIN Code
PIN Code. Note that if the pin code is not the default
0000 then the correct PIN code must be entered
before enabling SMS messages in the monitoring
tab. If an incorrect PIN code has been entered the
module must be reset before the new PIN code can
be used.
2.3 Safe Numbers
Up to three safe telephone numbers can be entered.
Besides, the Allow Numbers filter enables selecting
a larger group of numbers. The module will only
respond to these numbers. The numbers are also
used for alarms and events (irrespective as to
whether filtering is enabled).
Note that telephone numbers must be entered in the
international number format and without spaces or
brackets. For example, the Dutch country code is
0031 so the mobile telephone number 0698765432
should be entered as +31698765432. Please test
every entered number to ensure correct operation.
If Safe Numbers and Allowed Numbers are
both not filled in, the GPRS Module will not
communicate! It will transmit no alarms or
events!
2.4 Shortcuts
In the GPRS Module event configuration, shortcuts
are used as the event sources. You can name the
shortcuts after their application. If you sms this name
to the module, the event will take place.
2.5 Message on event
At the event configuration of a connected MasterBus
device, you can put up to 6 messages in the
Command field. The GPRS module features a menu
to rename the messages and choose a telephone
number to sms the message to.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt GPRS Module at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt GPRS Module in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info