785644
20
Zoom out
Zoom in
Previous page
1/28
Next page
MASTERBUS
48 Augustus 2009 / ChargeMaster1 12/35-3, 12/50-3, 24/20-3 & 24/30-3/ NL
Vaste Instellingen
Temperature com Temperatuurcompensatie voor laadspanning -30mV/°C -60mV/°C (read only)
Max allowed upp Maximaal toegestane temperatuur +300/+600mV (read only)
Max allowed low Maximaal toegestane temperature 480 min (read only)
Max voltage com Maximale spanningscompensatie voor
temperatuurgecompenseerd laden
+0.3/+0.6V (read only)
AGM / GEL floa AGM / GEL float spanning instelling +550/+1100mV (read only)
Lithium ion
TBD
Events
Event x bron
Kies een event van de ChargeMaster om te
dienen als Event x. Maximaal 9 events.
Uitgeschakeld Zie de lijst met event-
bronnen, paragraaf 6.3.5
Event x doel Kies een MasterBusapparaat om te dienen als
doel.
Kies… Afhankelijk van systeem.
Event x
commando
Kies een commando, afhankelijk van het gekozen
doelapparaat.
Kies… Eventcomm. doel-app.
ChargeMaster: par 6.3.6
Event x1 data Data is gekoppeld met het commando, zie ook
afbeelding 13.
Uit Uit,Aan,Kopiëren, Geïnver-
teerd kopiëren, Schakelen.
Event x+1 Dit event verschijnt als event x gedefiniëerd is. Uitgeschakeld Zie event x
* Afhankelijk van het model CM1: 12/35-3, 12/50-3, 24/20-3, 24/30-3.
Figure 13: Event data
Input is een puls, gevolgd door een langer signaal.
On (Aan) verandert de status van het commando naar On
bij het eerste signaal.
Off (Uit) verandert de status naar Off bij het eerste signaal.
Copy laat de status de input volgen.
Copy Invert laat de status het omgekeerde van de input
volgen.
Toggle verandert de status bij het eerste signaal en terug
bij het tweede signaal. Dit type data wordt vaak gebruikt in
combinatie met een pulsschakelaar.
6.3.5 Eventlijst met de ChargeMaster als bron
Event configuratie laat de ChargeMaster1 commando’s geven (als bron) of ontvangen (als doel) bij het communiceren met
andere aangegesloten MasterBusapparaten. Hieronder staan de events met de ChargeMaster als Eventbron:
On ChargeMaster is ingeschakeld
Bulk Laadtoestand is Bulk
Abs Laadtoestand is Absorptie
Float Laadtoestand is Float
Failure MasterBus alarm als de lader in fouttoestand is
CSI Charger Status Interface: MasterBus-alarm om alarmhoorn te laten klinken bij failure.
Equalize ChargeMaster is in Equalize mode
Fan ( 50% load / 50°C) MasterBussignaal om een externe ventilator in te schakelen (bij 50% belasting en 50°C)
Led 1 LED 1 licht op
Led 2 LED 2 licht op
Led 3 LED 3 licht op
Led 4 LED 4 licht op
Led 5 LED 5 licht op
6.3.6 Eventlijst met de ChargeMaster als doel
U kunt de ChargeMaster commando’s laten ontvangen van een ander apparaat. De ChargeMaster is hier het Eventdoel.
Mpc reduce Commando om de wisselstroom (AC) te reduceren met 5%/sec
Mpc stop Commando om de wisselstroom (AC) snel te reduceren
Bulk Commando om de Bulkfase te starten
Abs Commando om de Absorptiefase te starten
Float Commando om de Floatfase te starten
State Commando om de ChargeMaster in te schakelen
Input
On
Off
Copy
Copy
Invert
Toggle
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt ChargeMaster 24 20-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt ChargeMaster 24 20-3 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info