Manual Mastervolt ChargeMaster 12 10 (page 3 of 12) (English, German, Dutch, French, Italian, Spanish)

785637

Zoom out

Zoom in

1/12

CHARGEMASTER 12/10 & 24/6 ENGLISH

Product description and application

The ChargeMaster 12/10 and ChargeMaster 24/06

are battery chargers for charging and maintaining

the charged condition of lead batteries and

supplying users connected to the battery in

permanent installations. Models ChargeMaster

12/10 and ChargeMaster 24/06 are protected

against water spraying and dust.

Installation and instructions for use

1. Due to possible moisture accumulation and

optimal heat discharge, the ChargeMaster

battery charger must be installed in a well-

ventilated room as close as possible to the

batteries. We advise to mount the unit on a flat

metal surface with the connecting cables

downward.

2. See figure 2. Connect the cable eyes to the

battery to be charged: the minus cable (black) to

the minus (–) pole of the battery, the plus cable

(red) to the plus (+) pole of the battery.

3. Plug the AC mains cable into the wall socket.

The battery charger will now commence the

charging cycle.

Indications

The charger is equipped with a green LED indicator

(2) that flashes when the unit is charging. The

indicator remains lit continuously to indicate that a

charging cycle has been completed (float). If the

indicator is off while the plug of the AC-cable is

connected to the mains, contact your supplier.

Settings

See figure 1. There are 3 jumpers (3, 4, 5) on the

side of the mains and battery cables for specific

applications of the charger. If necessary, the

jumpers can be removed with small tongs or

tweezers.

 If jumper (3) is removed, the output voltage will

be increased to compensate the voltage drop in

case a battery isolator (diode) is used to charge

several batteries.

 If jumper (4) is removed, the charger is suitable

for charging gel / AGM batteries (high float).

 If jumper (5) is removed, the charger only

functions as a drop charger (force float).

 Via plug (1) various settings can be adjusted in

terms of software to your specific wishes (control

software and interface not included). This plug

can also be used for external warning systems.

Check the Internet site www.mastervolt.com for

applications. Please mind that this plug is not

intended for connecting a battery temperature

sensor.

Safety regulations and measures

1. Install the charger according to the stated

instructions.

2. Never use chargers at a location where there is

danger of gas or dust explosions.

3. Connections and safety features must be

executed according to the locally applicable

regulations.

4. If the plus and minus connections on the battery

are exchanged, the fuse (6) in the DC-wiring will

blow. Check whether all connections are

connected correctly before replacing the fuse.

Be sure to use the appropriate fuse (refer to

specifications). The guaranty will be void in case

the fuse-holder is removed from the plus-cable.

Guarantee terms

Mastervolt guarantees that this charger was built

according to the legally applicable standards and

stipulations. During production and before delivery

all chargers were exhaustively tested and

controlled. If you fail to act in accordance with the

regulations, instructions and stipulations in this

user’s manual, damage can occur and/or the unit

will not fulfil the specifications. This may mean that

the guarantee will become null and void.

The guarantee period is 2 years.

Liability

Mastervolt cannot be held liable for:

 Damage resulting from the use of the battery

charger.

 Possible errors in the included manual and the

consequences of these.

 Use that is inconsistent with the purpose of the

product.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt ChargeMaster 12 10 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mastervolt ChargeMaster 12 10 Manual

Product: