785621

Mastervolt Charge Mate Pro 40 Manual

4
Zoom out
Zoom in
Previous page
1/16
Next page
4
ENGLISH
Charge Mate Pro
The Mastervolt Charge Mate Pro is a current limited electronic charge relay for the distribution of
charge current between two battery banks. The battery banks are connected when the voltage rises
above a pre-set value for at least 5 seconds. When the voltage drops the battery banks are isolated
again. With an optional remote control switch the Charge Mate Pro can be used as a switch for
emergency starts of the motor. This will overrule the automatic function and disables the current
limit.
Only use battery banks with the same type of charge characteristics.
The Charge Mate Pro can only be applied in 12 Vdc or 24 Vdc installations with a common
negative.
Safety regulations and measures
Install the Charge Mate Pro according to the instructions in this manual.
The Charge Mate Pro must be used in accordance with the specifications
Connections and safety features must be executed according to the locally applicable regulations.
Use cables with appropriate size wire and keep the cable connections as short as possible. Use
reliable terminals and fasten the bolts tightly, but do not over torque.
Examine your electrical installation on a regular base, at least once a year. Defects such as loose
connections, burnt wiring etc. must be corrected immediately.
Liability
Mastervolt cannot be held liable for:
Consequential damage resulting from the use of the Charge Mate Pro.
Possible errors in the included manual and the consequences of these.
Use that is inconsistent with the purpose of the product.
Warranty
Mastervolt assures the product warranty of the Charge Mate Pro during two years after purchase,
on the condition that the product is installed and used according to the instructions in this manual.
Installation or use not according to these instructions may result in under performance, damage or
failure of the product and may void this warranty. The warranty is limited to the cost of repair and/or
replacement of the product. Costs for labour or shipping are not covered by this warranty.
Correct disposal of this product (Waste Electrical & Electronic Equipment)
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused. When this crossed-out wheeled bin
symbol is attached to a product, it means the product is covered by the European
Directive 2012/19/EU.
Please be informed about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal
household waste. The correct disposal of your old product will help prevent potential negative
consequences to the environment and human health.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt Charge Mate Pro 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt Charge Mate Pro 40 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info