785603
8
Zoom out
Zoom in
Previous page
1/120
Next page
8February 2011 / AC Power Analyser / EN
MASTERBUS
5 MASTERBUS
5.1 WHAT IS MASTERBUS?
All devices that are suitable for MasterBus are
marked by the MasterBus symbol.
MasterBus is a fully decentralized data network for
communication between the different Mastervolt
system devices. This CAN-bus based communication
network has proven itself as a reliable bus-system in
automotive applications. MasterBus is used as power
management system for all connected devices, such
as the inverter, battery charger, generator and many
more. This gives the possibility for communication
between the connected devices, for instance to start
the generator automatically when the batteries are low.
MasterBus reduces complexity of electrical systems
by using UTP patch cables. All system components
are simply chained together. Therefore each device is
equipped with two MasterBus data ports. When two
or more devices are connected to each other through
these data ports, they form a local data network, called
the MasterBus. The results are a reduction of material
costs as only a few electrical cables are needed and
less installation time.
For central monitoring and control of the connected
devices Mastervolt offers a wide range of panels which
show full status information of your electrical system at
a glance and a push of a button. Three different panels
are available, from the MasterView Easy up to the full
colour MasterView System panel. All monitoring panels

all connected MasterBus equipment.
New devices can be added to the existing network in
a very easy way by just extending the network. This


in the future as well!
Mastervolt also offers several interfaces, making even
non-MasterBus devices suitable to operate in the
MasterBus network. For direct communication between
the MasterBus network and a product which is not from
Mastervolt, the Modbus interface is recommended.
CAUTION: Never connect a non-MasterBus
device to the MasterBus network directly!
This will void warranty of all MasterBus
devices connected.
5.2 EVENT BASED COMMANDS

initiate an action at another connected device. This is
done by means of event based commands. An event is
a condition to be met at which you want another device
to perform a task. Refer to section 6.4 for explanation.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt AC Power Analyser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt AC Power Analyser in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info