797872

Masterpro BGMP9132 Manual

19
Zoom out
Zoom in
Previous page
1/55
Next page
EN
CLEANING AND MAINTENANCE
• Before you clean the device, unplug it.
• The blades are sharp. Be careful when you clean blade units.
• Make sure that the cutting edges of the blades do not come into contact with hard objects. This may
cause the cutting edges to become blunt.
• Clean the motor unit with a damp cloth and dry thoroughly.
• Clean other parts in lukewarm water with some cleaning agent or in a dishwasher. Refer to the
cleaning table.
• If ingredients dry inside the blending vessels, fill the cups about 2/3 full with warm soapy water.
Assemble according to the instructions and blend the content for 20-30 seconds. Scrub gently and
rinse.
• Clean the 6 wing blade assembly rubber gasket regularly. Grab and lift the gasket from the base
and wash under warm water.
• Before storing the device you can wind the cable in cable storage at the bottom of the device.
TROUBLESHOOTING
EN
TIPS & RECOMMENDATION
• Due to the high friction created in cup by the blades the content temperature could raise slightly. To
prevent this, an ice cube or two can be added to maintain the temperature.
• If the food sticks to the wall of the blender jar, switch off the appliance and unplug it. Then use soft
spatula (not supplied with the product) to remove the food from the wall.
• The potatoes for creamy soups should be precooked.
• If ingredients get stuck in the 700 ml, remove them from the base, shake or tap it slightly and
continue with the process.
SYMBOL CHART
ISSUE POSSIBLE SOLUTION
The device does not start to work. Check if the plug is properly inserted into the power supply socket.
Check if all the removable parts are properly assembled.
The smoke comes out of the air vent. Stop and unplug the appliance immediately. Leave to cool down
for 15 minutes before further use.
The device stopped working during
the cycle.
Total continuous operation time 230 s could be exceeded. Set to
mode 0, unplug it and leave to cool down for 10 minutes. STOP
CAUTION! Rotating parts. Do not touch, clean or replace before unplugging the device
from power supply.
Regular cleaning is necessary. Inspect and clean any spillages, residues or dirt after
each use.
Failing to do that could greatly reduce performance of the device and/or increase the
possibility of device or personal damage.
Do not immerse in water/liquid.
Indoor use only.
Make sure you have read and fully undersood user manual before operating this device.
Unplug from power supply before parts assembly or cleaning.
CAUTION: Do not exceed maximum allowed operating and rest time.
CAUTION: Danger of overheating if maximum operating time is surpassed or hot content
is grinded.
Do not attempt any modification or repair by yourself.
CAUTION! Sharp objects. Use extreme care.
CAUTION! Hot surface.
Not dishwasher safe.
16 17
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Masterpro BGMP9132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Masterpro BGMP9132 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 17.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info