797838

Masterpro BGMP-9000 Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
IMPORTANT SAFEGUARD：
Before using the electrical appliance, the following basic precaution should always be
followed including the following.
1. Read all instructions first.
2. Before use, check that the voltage of your wall outlet correspond to the rated voltage
manner.
3. Do not operate any appliance with a damaged cord or plug or after the appliance malfunc-
tions, or is dropped or damaged in any manner. Return appliance to the nearest authorized
service facility for examination, repair or electrical or mechanical adjustment.
4. To protect against risk of electrical shock do not put in water or other liquid.
5. Do not let cord hang over edge of table or counter or touch hot surface.
6. To reduce the risk of electric shock, never operate this product with wet hands, spill liquid
in the product or submerge it in water or any other liquid.
7. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
8. Children should be supervised to ensure that they do not play with or touch the appliance.
9. Pay more attention on the running appliance , never leave appliance unattended
10. Do not place an appliance on or near a hot gas or on a heated oven.
11. Do not use outdoors, household use only.
12. Never operate the product when the cup is empty and do not remove the cup lid before
the blades come to a complete stop.
13. Unplug from outlet when not in use, before putting on or taking off parts, and before
cleanin
14. Avoid contacting moving parts
15. Warning: misuse may cause serious injury.
Care is needed when handling cutting blades, especially when removing the blade from the
bottle, emptying the bottle and during cleaning.
16. Keep hands and utensils out of container while blending to reduce the risk of severe
injury to persons or damage to the blender.
17. Blades are sharp. Handle carefully
18. To reduce the risk of injury, never place cutter-assembly blades on base without jar
properly attached.
19. Always operate blender with cover in place
20. Always operate appliance on a flat surface.
21. Never use any attachments which are not listed on the instruction book . The use of
EN EN
TRAVEL BLENDER
BGMP-9000
Rated voltage: 120V 60HZ
Rated power: 300W
attachments, including canning jars, etc, not recommended by the manufacturer may cause a
risk of injury to persons
22. Do not blend hot liquids.
SAVE THESE INSTRUCTIONS.
USAGE OF THE BLENDER
WARNING
The power plug can be inserted into a mains outlet socket Only after Sport Bottle is securely
installed on Blender Base as per below procedure; and before remove Sport Bottle from
Blender Base, unplug the unit from mains outlet socket.
1. Place the sport bottle on a flat surface , open the bottle ,
2. Fill the bottle with your favorite ingredients , all the ingredient must be filled below the
bottle max level mark,
3. Fasten the blade base on the open end of the bottle ,
4. Turn the bottle upside down , put the bottle and blade base together on the blender base,
ensure the three micro switch block in right position ,
5. Press the pulse button to start the machine, during operating, your finger need to press the
button.
6. Do not operate the blender without loading
7. If you want to stop the machine, please leave your finger from the pulse button.
8. After blend, turn the bottle over and place on a flat surface, take out the blade base, put
the drinking lid on.
NOTES
1. The appliance is only permitted to use 30’s continuously maximum. Before it’s used again,
it must cool down enough.
2. Bottle and cap are dishwasher safe.
3. Only for liquid like water, milk and soft fruits like Apple, banana, carrot, etc. Cut fruit first in
pieces.
4. If for cool drink, please sure the ice cube not large than 2*2cm, and please put some liquid
together with the ice, ice weight recommend no more than 90g one time
5. When overload, motor will automatically stop, please unplug, empty cup, wait for 15
minutes to cool down motor, after can use again.
CLEANING
1. Unplug the appliance from wall outlet before cleaning.
2. After use, clean the main body with wet tower and dry it with dry towel. Absolutely keep
away from water or high humidity.
3. Wash the cup and blade part in running water.
4. Keep children away from the combined cup and blade.
5. Don't clean it with "thinner" or "benzene" etc.
6. Keep away from direct sunlight and damp place.
7. Never immerse the Base (Motor unit) or power cord into water for cleaning.
03 04
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Masterpro BGMP-9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Masterpro BGMP-9000 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info