614266
11
Zoom out
Zoom in
Previous page
1/285
Next page
equipped with sliding or adjustable seat
backs, ensure that the backs are in the
locked position prior to operating the
boat.
Prior to starting the engine, you must
open the engine box and check the en-
gine compartment and bilge for gasoline
and oil vapors. You must also operate
the blower for at least four (4) minutes.
Failure to do so may result in re and/or
an explosion.
Failure to comply with the requirement of
operating the blower for at least four (4)
local regulations.
Always attach the engine emergency
safety shut-off lanyard to a part of your
clothing (such as a belt loop) when oper-
ating the boat.
Never override or modify the engine emer-
gency safety shut-o switch in any way
.
Never operate the boat, water ski, wake-
board or engage in other water activities
while under the inuence of alcohol or
drugs.
All persons must be seated in a designat-
ed occupant seating area while the boat
is in motion. (A seating label is afxed in
each model.) Never stand or allow pas-
sengers to stand in the boat or sit on the
motor box or tower (where equipped),
gunwale, decks, or any location other
than occupant seating while underway.
You or others may be thrown within or
from the boat, which could result in seri-
ous injury or death. Never allow occu-
pants to use sun pads or transom seating
while the engine is running. On models
minutes before starting the engine may re-
sult in serious injury or death to you and/
or others.
Never remove or modify any compo-
nents of the fuel system. Removal or
modication of any component of the
fuel system may cause a hazardous situ-
ation and will void the warranty. The
modern MasterCraft fuel delivery lines
are pressurized and attempting to loosen
or remove them may result in the un-
controlled release of fuel, which can be
environmentally hazardous, and may po-
tentially cause injury.
Never allow any type of spark or open
ame on board. It may result in re or
explosion.
Page 1-4 2014 MasterCraft Owners Manual • Safety Knowledge
S A F E T Y K N O W L E D G E
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastercraft X55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X55 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info