Manual Mastercraft X46 (page 200 of 285) (English)

614265

200

Zoom out

Zoom in

1/285

Carpet

Occasionally washing with mild deter-

gent and warm water or household carpet

cleaners will help keep the carpet clean.

Thoroughly hose the detergent out of the

carpet and into the bilge. (This is a good

time to clean the bilge also.) Allow the boat

to remain uncovered to air dry for several

days to prevent any mildew or odor caused

by moisture.

Teak Wood

Full teak platforms:

If shoes are worn when walking on the

teak, they should be proper boating shoes.

Black-soled shoes are likely to scuff the

surface, resulting in marks that may be dif-

cult to remove or even leave permanent

marks that are not covered under warranty.

Regular cleaning and oiling of teak wood

will maintain its original appearance. Un-

protected wood will turn gray and could

split or separate. If this happens it may void

the warranty.

New teak platforms have been sealed

and nished with an oil-based, wood pre-

servative by the manufacturer. Platforms

will keep the new look and last for many,

many years if properly maintained. For

best results re-oil the platform and allow it

to dry before the rst use. If the boat spends

a lot of long weekends on the lake with the

swim platform in the water or if the plat-

form sits uncovered in the sun, it should be

oiled one or two times a month during the

rst season; then as needed after that. The

platform should be covered when not in use

or when stored for the winter.

Many products such as boiled linseed oil,

tongue oil, teak oil and other outdoor wood

preservatives can be found at marinas, paint

stores or home improvement stores. Some

oils such as linseed oil should be thinned

with a thinner like mineral spirits before

use. (70 percent oil-30 percent thinner.)

When oiling a platform, apply a coat

of oil with a wet cloth, work into the

seams, end grain and edges. Allow the

oil to set approximately 15 minutes and

then wipe off the excess oil with a dry

cloth. Do not let the oil dry on the plat-

form in the sun. Excess oil should be re-

moved with a dry cloth.

Care and Maintenance • 2014 MasterCraft Owners Manual Page 6-7

C A R E A N D M A I N T E N A N C E

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X46 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mastercraft X46 Manual

Product: