Manual Mastercraft X46 (page 172 of 285) (English)

614265

172

Zoom out

Zoom in

1/285

Boat Operations • 2014 MasterCraft Owners Manual Page 4-63

B O A T O P E R A T I O N S

sibility of making contact with the tran-

som or swim platform, which could re-

sult in injury. Also, while the seat back is

positioned to allow aft seating, individu-

als may be exposed to carbon monoxide

if the engine is running.

Carbon monoxide is a colorless, tasteless,

odorless and poisonous gas that accumu-

lates rapidly and can cause serious injury

or death. Exposure to carbon monoxide

can be fatal in a matter of minutes. Expo-

sure to even low concentrations of carbon

monoxide must not be ignored because the

eects of exposure to carbon monoxide

can build up and be just as lethal as high

concentrations. Carbon monoxide from ex-

haust pipes of inboard or outboard engines

may build up inside and outside the boat

in areas near exhaust vents, particularly

during slow-speed operations. STAY AWAY

from these exhaust vent areas, which are

located at the stern of the boat when the

boat engine is running.

Optional jump seats also have latches

to hold them in place. Open the observer

seat adjacent to the jump seat and note that

there is a lock pin that should be inserted

to hold the jump seat secure against the

side deck of the observer seat. Failure to

do this could allow the jump seat to move

during boat operation, which could result

in passenger injury.

Convertible af-facing seat backs at the

transom or sun pad should always be in

the stowed position when the boat is un-

derway. Anyone seated facing af could

become dislodged when the boat is under-

way, which could result in sliding o the

seating and making contact with the tran-

som or swim platform. Jump seats should

be secured against the deck with a lock

pin accessible under the observer seat

to avoid dislodging passengers while the

boat is underway. Convertible and remov-

able seat backing should always be se-

cured prior to use. Care should be taken to

avoid pinching ﬁngers or other skin when

sliding the backing or securing/removing

the removable seat.

Special Attention:

In some models, removable cushions

are available as an option. In those in-

stances, regardless of where the cushions

are custom-built to be placed, they will

be constructed of the same materials as

the rest of the upholstery material. That

means that they will require the same

cleaning and care. (See Care and Main-

tenance upholstery information in this

Owner’s Manual.) Removable cushions

should also be stowed in storage when

the boat is underway unless they are

snapped into position. Failure to stow or

snap removable cushions could result in

the cushion being lost overboard.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X46 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mastercraft X46 Manual

Product: