Manual Mastercraft X46 (page 158 of 285) (English)

614265

158

Zoom out

Zoom in

1/285

down for OFF.

The switches are marked for each and

may also include the underwater lights,

where equipped. The switches are op-

erated as ON-OFF and should always

be left in the OFF position when the

system(s) is not in use. The instruc-

tions work whether the boat is equipped

with one (1) or both of the options, but

will not be found in boats that are not

equipped with either option.

Do not use the shower with the en-

gine running. The shower wand location

and limited length of the hose means

that most individuals shower while at

the transom or on the swim platform.

Because this is also the location for the

engine exhaust emissions, dangerous

fumes may be present if the engine is al-

lowed to run.

Carbon monoxide is emitted from the en-

gine’s exhaust system. Do not use the shower

or occupy the swim platform with the engine

running. Never run the engine without proper

ventilation. Do not run the engine in a con-

ﬁned space or where fumes may be trapped.

Routine maintenance is not required

beyond occasionally checking the lines

and head to be certain these elements are

not damaged in any fashion, and that the

hose continues to be in good condition.

Be certain to follow the Storage & Win-

terization section’s instructions found

elsewhere in this Owner’s Manual.

Troubleshooting:

If the shower and/or wash down do not

work when the switch is turned ON, verify

at the main circuit breaker panel that the

circuit has not tripped. Repeated tripping

or if the system does not work when the

circuit is on indicates a problem that re-

quires the attention of an authorized Mas-

terCraft dealer. The pump is not located

in a consumer-accessible location. Also

verify that the wand has no obstructions at

the head that would prevent proper opera-

tion and that the line is not kinked, thereby

inhibiting the ow of water.

Seat Heaters

Models:

Optional on all models for driver’s

seat; certain models for observer’s seat.

Purpose:

The seat heat option allows the

equipped seats to be warmed to tempera-

tures above those of the ambient air.

Location:

The electrical seat-heat mechanisms

are located inside equipped seats. The

seat heat switch is on the dash panel.

In some models, an optional observer

Boat Operations • 2014 MasterCraft Owners Manual Page 4-49

B O A T O P E R A T I O N S

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X46 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mastercraft X46 Manual

Product: