614265
148
Zoom out
Zoom in
Previous page
1/285
Next page
Boat Operations • 2014 MasterCraft Owners Manual Page 4-39
B O A T O P E R A T I O N S
the platform to fold down, reducing the
amount of room required for storage.
To determine whether the boat is so
equipped, look beneath the platform and
see if there is a bracket with a pin. If so,
the swim platform can be folded. To do
so properly, follow these instructions:
(Note that the platforms themselves
are fairly heavy, and releasing the brack-
et may result in the platform falling
down, and thereby striking the transom
with excessive force. Please provide
some kind of manual support to the plat-
form at the time of releasing the bracket,
and then slowly lower the platform into
place for towing or storage.)
NOTE: The attitude adjustment
plate may also need to be lowered prior
to lowering the swim platform.)
Folding Down the Platform
Remove the safety hinge pins in each
swim platform bracket.
Begin by lifting the platform about
four (4) inches upward while easing the
platform away from the boat transom.
This will allow the platform to move
freely on the hinge.
NOTE: Ensure there is no tightness
while the swim platform is being folded.
There should be no binding during this
action.
The platform must be raised and locked
into position for transportation of the boat,
as well as use of the platform while boating.
Leaving the platform down may result in
damage to the boat transom during trans-
port that will not be covered by the war-
ranty!
Securing the Platform
Lift the platform to an angle of ap-
proximately 20 degrees from the boat.
Lightly push the platform (do not
shove nor jam) toward the transom to al-
low the platform to set in place.
Verify that the platform is in the locked
position and will not fall down. Failure
to verify that the platform is locked
may result in the platform falling
while someone is on it and could result
in injury.
Insert one (1) safety hinge pin into
each platform bracket.
148


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastercraft X46 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X46 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info