614265

Mastercraft X46 Manual

142
Zoom out
Zoom in
Previous page
1/285
Next page
Boat Operations • 2014 MasterCraft Owners Manual Page 4-33
B O A T O P E R A T I O N S
MENTS, USE SHORT MOMENTARY
TAPS OF THE SWITCH.
Special Attention:
On the X2, X10 and X25 models, at-
titude adjustment plates are limited to
fty percent (50%) maximum extension
when the boat speed exceeds twenty
miles per hour (20 mph) or thirty-two
kilometers per hour (32 km/h).
Maneuvering a boat with the atti-
tude adjustment plate extended requires
practice to master. Initial times run-
ning with the attitude adjustment plate
extended should be done at low speed
with plenty of room. This is critical to
learning how the attitude adjustment
plate affects control and maneuverabil-
ity, especially when teaming the attitude
adjustment plate with surf tabs.
Additional Special Attention:
DO NOT use the attitude adjustment
plate(s) to board the boat. The edges are
sharp and can easily slice through skin.
The plate(s) is also not sturdy enough to
withstand many people’s body weight.
Damage to the plate(s) in this manner
is not covered under warranty. Use only
boarding ladders and swim platforms to
board from the transom side when boats
are equipped with an attitude adjustment
plate(s).
Never use the attitude adjustment plate(s)
to board or assist in boarding the boat.
Sharp edges can cut individuals, causing
potentially serious bleeding. Damage to
the plate(s) from people using it to board
the boat is not covered under warranty.
Additional Special Attention:
Care should also be taken when
backing up the boat in shallow water, re-
moving boats from the water on steeply
pitched access areas, or backing up with
the boat on a trailer. The attitude adjust-
ment plate(s) does not fold or retract,
and it may require additional clearance
to avoid damage to the plate(s). Result-
ing damage from failure to follow in-
structions is not covered under warranty.
Care must be taken to ensure that there is
always sucient clearance around the at-
titude adjustment plate, whether it is in the
water or out, particularly on a trailer. The
attitude adjustment plate(s) extends be-
yond the boat transom and is not foldable
or retractable. Damage to the plate(s) from
failure to allow sucient clearance is not
covered under warranty.
Troubleshooting:
1) If the switch(es) is/are unresponsive,
check the main circuit break panel to de-
termine if the circuit has tripped. Re-set
the circuit and try the switch again.
2) If the circuit continues to trip, present
the boat to an authorized MasterCraft
dealer for repair.
3) If the boat does not respond as noted
in the above instructions, turn OFF the
switch and do not use the attitude ad-
justment function until the system has
been checked by authorized MasterCraft
… 142 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastercraft X46 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X46 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info