Manual Mastercraft X46 (page 114 of 285) (English)

614265

114

Zoom out

Zoom in

1/285

Note: The switch knob may be re-

moved when it is in the OFF position.

This is a security feature to ensure that

batteries are OFF.

If the engine will not start because

the battery is discharged, the engine

may be started from the house battery

by placing the switch in the COM-

BINE BATTERIES position to get ad-

ditional power from the secondary bat-

tery.

After the engine is started, the switch

should be returned to the ON position

and NOT allowed to remain in the

COMBINE BATTERIES mode. In the

COMBINE position, the drain on the

system will be substantially accelerat-

ed and may eventually discharge both

batteries, leaving the boat stranded on

the body of water.

Bilge pumps will not operate in either the

manual or automatic mode if the batteries

are fully discharged. This condition may al-

low excessive water into the hull which can

damage or sink the boat. Make frequent

checks of battery charge and bilge pump

function when boats are moored and ex-

posed to the elements.

Troubleshooting:

Because battery needs can vary sub-

stantially depending on a number of

factors in usage from boating locations

to number of electrical components on

the boat, MasterCraft does not place a

specic battery or batteries in the boat.

The company strongly encourages you

to discuss this critical matter with your

authorized MasterCraft dealer prior to

purchase and placement of the battery

in the boat. All batteries must have 750

cca (cold cranking amps). Less can re-

sult in too-fast discharge of the battery

charge and may leave boaters stranded

on the body of water. Spiral cell batter-

ies are recommended.

Review all electrical information

provided in this Owner’s Manual prior

to rst time operation of the boat.

Low Voltage Battery Alarm

Models:

All.

Purpose:

In the event that the stereo has been

functioning when the boat is not ON

and running, the voltage drain on the

battery (or batteries) may result in dif-

culties with re-starting the boat. It may

also cause intermittent erroneous or

uctuating gauge readings. When the

voltage level reaches 10.5 volts or be-

low, the system will shut off the stereo

and sound the alarm.

Location:

Internal and unseen.

Operation:

Generally, the appropriate action

is to leave the stereo OFF, as well as

disengaging any other peripheral elec-

trical components, and keying ON the

engine. Running the engine at a moder-

ate rate for several minutes without the

additional drain of stereo and unneces-

sary electrical equipment will allow the

Boat Operations • 2014 MasterCraft Owners Manual Page 4-5

B O A T O P E R A T I O N S

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X46 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mastercraft X46 Manual

Product: