Manual Mastercraft X30 (page 214 of 285) (English)

614263

214

Zoom out

Zoom in

1/285

Care and Maintenance • 2014 MasterCraft Owners Manual Page 6-21

C A R E A N D M A I N T E N A N C E

Repeat Check for Fuel

and/or Exhaust Leaks

This function should be performed after

about three (3)-to-ve (5) minutes of run-

ning the engine to determine whether any

leaks are apparent.

    After three (3)-to-ve (5) minutes of

operation, shut down the engine and ensure

thattheenginesafetystartingswitchisdis-

connected. Be certain that the throttle/

shift control lever is in neutral. Again,

inspectthefuelsystemaswellaspossible.

Inspectthefuelpumpgasket,fastenergas-

kets, regulator seal and sender gasket for

leaks.If the odor of gasoline is strong or

ifyou seevisual evidence offuel outside

the system, cease all operations and take

the boat immediately to an authorized

MasterCraft dealer’s service department

to determine the source of the leak. The

leak must be repaired before the engine is

restarted.Becausethelinesonlatemodel

MasterCraftboatsarepressurized,theycan

be disconnected and/or removed ONLYby

using specialized tools that are not avail-

able to the public.

 Reinspect after the fuel tank has been

lledfullforthersttimeoftheseason.

 Note that fuel systems vary by model.

The pump-in-tank location on top of the fuel

tank will resemble one of the two adjacent

photos.

This is important! Fuel leakage can

lead to a build-up of potentially explosive

fumes within the engine compartment.

DO NOT IGNORE OR OVERLOOK

THIS INSPECTION AND REPAIR AS

NECESSARY!

Also, re-check that there is no unusual

exhaust odors as described prior to starting

the engine.

After Each Use

General Cleaning and Storage

 Refer to the Corrosion Prevention and

Cleaning the Boat sections of this Owner’s

Manual. After each outing, the boat should

receiveageneralcleaninganddryingpriorto

being stored. Even if the boat is kept in a slip,

owners/operators should wipe down the inte-

riorandshouldperiodicallyremovetheboat

from the water for a general cleaning.

In instances of boats being left moored

in water, it may be necessary to periodi-

cally run the bilge pump to clear out water

that has intruded into the bilge compart-

ment. Keep the battery fully charged in

order to be able to provide this function.

Inspections

As noted in the Before Each Use section,

some functions there need to be performed

following use of the boat, such as checking

the intake strainer or seacock strainer if evi-

dence has shown that debris collects during

the outing. Wet debris is often easier to re-

move.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X30 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mastercraft X30 Manual

Product: