614259

Mastercraft X14v Manual

237
Zoom out
Zoom in
Previous page
1/285
Next page
hitch ball. Check to make sure the wheel
on the tongue jack is raised or that you are
not parked downhill. Correct these condi-
tions, then try to open the handle. Also if
the tongue jack is forcing the front of the
trailer up or the trailer is pushing against
the tow vehicle, it can also result in failure
of the coupler to open properly.
To open the coupler equipped by Tie
Down Engineering:
Remove the hitch pin from the hole in
the side of the coupler. Lift the latch handle
to an upright position. The coupler should
unlatch easily. If not, the ball may be over-
sized or egg-shaped, or foreign matter
could be lodged in the coupler ball sock-
et, or the coupler is pushing on the hitch
ball. Check to make sure the wheel on the
tongue jack is raised or that the rig is not
parked downhill. Correct these conditions,
and then try to open the handle. Also, if the
tongue jack is forcing the front of the trailer
up or the trailer is pushing against the tow
vehicle, it can also result in failure of the
coupler to open properly.
To close the coupler:
Place the coupler over the ball, lower the
coupler and close the handle. An audible
“click” will be heard. The handle should
close with nger pressure. If the handle will
not close freely, the ball is not fully insert-
ed into the socket, it is over-sized or egg-
shaped. DO NOT FORCE THE HAN-
DLE. If necessary, replace the ball with a
quality unit that meets SAE specications.
Insert the hitch pin into the hole on the
side of the coupler. The hitch pin will not
go in the coupler if the hitch ball is not
seated properly.
DO NOT tow the trailer with the handle open
or if the latch handle will not remain closed.
Check to see that the coupler is locked. Lif
on the handle without pushing the button
Page 7-12 2014 MasterCraft Owners Manual • MasterCraft Trailers
M A S T E R C R A F T T R A I L E R S
… 237 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastercraft X14v at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X14v in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info