Manual Mastercraft X10 (page 14 of 285) (English)

614261

Zoom out

Zoom in

1/285

Consistent

Attention

Required

Carbon Monoxide (CO)

When anchoring the boat, you MUST

turn OFF the engine. In most models, ex-

haust fumes containing carbon monoxide

are emitted from the exhaust ap area of

the transom immediately below the swim

platform. No one should ever be on the

swim platform or transom while the engine

is operating. This includes while using the

shower option in those models where the

engine must run in order to create hot water.

In those instances, showering must never be

done on the swim platform or transom be-

cause the carbon monoxide fumes are toxic.

Carbon monoxide is a colorless, tasteless,

odorless and poisonous gas that accumu-

lates rapidly and can cause serious injury

or death. Exposure to carbon monoxide

can be fatal in a matter of minutes. Expo-

sure to even low concentrations of carbon

monoxide must not be ignored because the

eects of exposure to carbon monoxide

can build up and be just as lethal as high

concentrations. Carbon monoxide from ex-

haust pipes of inboard or outboard engines

may build up inside and outside the boat

in areas near exhaust vents, particularly

during slow-speed operations. STAY AWAY

from these exhaust vent areas, which are

located at the stern of the boat, and DO

NOT swim or engage in any watersports

or other activities in or near the stern area

of the boat, including, without limitation,

the swim platform and the rear sun deck,

when the engine is in operation. Under no

circumstances should the owner and/or

operator allow persons to hold onto the

swim platform while the engine is operat-

ing and the boat is in motion. These activi-

ties (sometimes known as “teak surﬁng” or

“platform dragging,” where the participant

holds onto the swim platform and is pulled

through the water, and/or “body surfs” im-

mediately behind the boat) are extremely

dangerous, highly likely to result in death

or serious bodily injury, and are a misuse of

this product.

Carbon monoxide (CO) enters your

bloodstream through the lungs, blocking

the oxygen your body needs. Prolonged ex-

posure to low concentrations or very quick

Safety Knowledge • 2014 MasterCraft Owners Manual Page 1-7

S A F E T Y K N O W L E D G E

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X10 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mastercraft X10 Manual

Product: