588458

master AC 1200 E Manual

25
Zoom out
Zoom in
Previous page
1/64
Next page
INSTALATION OF THE EXHAUST PIPE
The unit is a portable air conditioner that may be moved from
room to room.
1. Using the window spacer (fig. 8)
Offer window spacer to the window gap and adjust
the length as you need.
Feed exhaust hose through the window spacer and
slide window across so that spacer is held securely.
This technique may also be used for sash windows.
Note: Take care to maintain protection against
intruders
2. Using the adaptor (fig.9, 10)
Cut a 152mm diameter hole in the wall or window.
Feed exhaust hose through the window or wall and
attach the threaded adaptor from the outside as
shown.
When not in use, plug the hole with the cover
provided.
MOUNTING OF THE EXHAUST PIPE (Fig. 11 – 14)
Use only the hose provided and clip exhaust hose and unit
adaptor to the back of the air conditioner
Avoid kinks and bends in the exhaust hose as this will
cause expelled moist air to build up causing the unit to
overheat and shut down. Fig 11 & 12 show correct
position
The hose may be extended from 300mm to 1500mm but
for maximum efficiency use the shortest length possible.
WARNING!
The length of the exhaust pipe is specially designed according to
the specification of this product. Do not replace or prolong it with
your own private hose as this could cause the unit to mal-function.
Instalation of the carbon filter (fig. 15,16)
1. Remove the filter frame from the unit.
2. Separate the filter fixer from the filter frame.
3. Remove the active carbon filter from its plastic bag.
4. Insert the active carbon filter into the filter frame.
5. Fix the filter by reassembling the fixer onto the filter
frame.
6. Re-fit the filter frame inside the unit.
OPERATION
Control Panel (Fig. 17)
1. ON/OFF button
2. MODE button
3. TEMPERATURE UP button
4. TEMPERATURE DOWN button
5. SPEED (ventilation) button
6. TIMTER button
7. SLEEP button
8. IONIZER button (optional)
a. Display window
b. Heating operation indicator (optional)
c. Automatic mode indicator
d. Cooling operation indicator
e. Fan operation indicator
f. High ventilation indicator
g. Medium ventilation indicator
h. Low ventilation indicator
i. Receiver for remote control
j. Timer operation indicator
k. Sleep function operation indicator
l. IONIZER operation indicator (optional)
m. “Water Full” indicator
Turning ON/OFF
Press ON/OFF button, the unit will work in cool mode
with low fan speed, the pre-setting temperature is 24°C.
Indicators of the functions in progress come on at the same
time. *NOTE! The display window shows the ambient
room temperature from 0oC to 50oC
To turn the unit off, press ON/OFF button again.
Setting mode/function
Press MODE button to select required working mode: cooling, fan
or heating, (Heating is only available for heating & cooling
models.)
Sign of your selected mode comes on.
Setting temperature
1. Press 'Temperature up' or 'Temperature down' button to
regulate the temperature you desired.
2. The display window will show the temperature you set as
you press 'Temperature up' or 'Temperature down' button.
Otherwise, it will always show the ambient temperature.
3. The pre-setting temperature of this machine is: 24oC for
cooling, 20oC for heating.
Setting ventilation speed
Press SPEED button to choose the ventilation speed you need,
high or low. The sign of high or low ventilation will light on at the
same time.
Setting timer
1. Press TIMER button to set the operating hours you desired
(1 to 24 hours, the sign of timer will light on). When the
set time has been reached, the machine will turn off
automatically. The display window will show the hour(s)
you set as you press TIMER button. If the timer button is
not pressed, the unit will work continuously.
2. By pressing the timer but without turning on the other
functions, you can PRE-SET the time for the machine to
work. For example, if you press the timer to '2', the unit
will work automatically after 2 hours.
Sleep function
1. In cooling mode, by pressing the SLEEP button, the set
temperature will increase 1oC at the 1st hour, another 1 oC
at the second hour, then keeps at that temperature.
2. In heat mode, by pressing the SLEEP button, the set
temperature will descend 1oC at the 1st hour, another 1 oC
at the second hour, then keeps at that temperature.
3. In sleep mode, the ventilation will keep at low speed. Re-
press the SLEEP button, the setting temperature and
ventilation speed will return to the pre-selected one.
4. The unit will shut down automatically after the SLEEP
function running for 12 hours.
5. Please note, the sleep function is not available while the
machine is working in ventilation, dehumidification or
auto mode. Only available in Cooling or Heating mode.
6. When the machine is in Sleeping function, the Fan
Speed would turn to be LOW speed.
Ionizer function (optional)
This is only for the model with Ionizer function, i.e. model no.
with I.
To start the ionizer function, please press IONIZER button, this
function can push away the dust and large particles in the air.
Self-diagnosis
This machine is equipped with self-diagnosis function. If
something is wrong in the machine, the LCD will show the word
“E1” or “E2”. As this time, please call your service centre.
All the above functions can also be performed with the supplied
remote control. (fig. 18)
This remote control requires 2 pcs AAA batteries to operate.
EFFICIENCY BOOSTING (fig. 19)
This unit is equipped with “energy efficiency boosting” function,
by adding the water to the water tank as below, the energy
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for master AC 1200 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of master AC 1200 E in the language / languages: English, German, Danish, Italian, Polish as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info