806939

Mascott MOL-HA-IHWD01-B - Hot water dispencer Manual

5
Zoom out
Zoom in
Previous page
1/32
Next page
5EN
• Close the water tank by placing the water tank
cover (2) back on the water tank (3).
• Place your cup on the removable drip tray (6)
and make sure it aligns with the spout (9)
• Press the power ON/OFF button (1), which lights
up blue, after ± 5 to 10 seconds starts to dispense
200 ml of hot water. Once finished the device will
automatically switch off.
• Two times press the power ON/OFF button (1),
which lights up green, after ± 5 to 10 seconds
starts to continuous dispense hot water. When
the desired volume has been reached, press the
power ON/OFF button (1) to stop the device from
dispensing and automatically switch off.
• When the water tank is out of water, the power
ON/OFF button (1) will flash blue and green
alternately ± 30 seconds, indicating you need to
refill the water tank. (3)
CAUTION: Prevent burn injuries. Do
not touch the hot boiled water; it is
very hot.
• If you are not going to continue using the device,
remove the plug from the power socket.
THERMOSTAT
The device features a built-in thermostat that
automatically shuts OFF the device in case of
overheating or abnormal operation. If the device
become to hot (overheating) the thermostat and
fuse will activate and stop the device from working.
Let it cool down for approximately 15 minutes and
the fuse will automatically reset. The device can be
used again.
In case the device doesn’t operate normally after
letting it cool down, it is advised to reset the
thermostat fuse manually by pushing the the reset
button key (B) in the small reset buttonhole (A) until
you hear a click. Please use the reset button key (B)
for this action.
DRAINAGE STOPPER
In case the device will not be used for a long period
of time, clean it and remove the wastewater.
Open the drainage stopper (C) by turning it
counterclockwise, so the wastewater can flow
out . Once all the wastewater has been removed,
place the drainage stopper (C) back by turning it
clockwise and make sure it tightens well.
Note! In case of any water leakage after filling the
water tank, check that the drainage stopper is
properly tightened.
DRIP TRAY
The device is equipped with a removable and
variable drip tray. Depending the cup size used, the
drip tray can be placed on 2 dierent heights. The
dierence between the 2 heights is 7 cm.
When the drip trap is mounted on the lowest
position (8A), the available space between the drip
tray and spout = 17 cm.
When the drip trap is mounted on the highest
position (8B), the available space between the drip
tray and spout = 10 cm.
A
B
C
8A
8B
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mascott MOL-HA-IHWD01-B - Hot water dispencer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mascott MOL-HA-IHWD01-B - Hot water dispencer in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info