628743

Martin 2518 DMX Controller Manual

24
Zoom out
Zoom in
Previous page
1/28
Next page
24
appendix b
S
ERVICE
C
ALIBRATING
FADERS
If the controller does not output the full range of DMX values, or outputs different
values from the same fader position, the faders can be recalibrated as follows.
1.
Press and hold [Blackout] to put the controller in standby mode.
2.
Slide all six faders to the top.
3.
Press [Blackout] to bring the controller out of standby mode. Quickly
press scene buttons 4 and 6 at the same time and hold for 1 sec-
ond. Release the scene buttons.
4.
The channel LEDs chase upwards. Repeat steps 1-3 if the LED
chase does not occur.
5.
In controllers with CPU firmware version 2.1 and above, the faders
are now calibrated and the controller is ready for use.
6.
If your controller has firmware version 1.5 or below, press a DMX
Channel button. (Optional) Slide each fader, one at a time, between
0 and 100%. When a fader is at 0, the display reads 0 (DMX 0).
When a fader is at 10, the display reads FF (DMX 255). Do not
leave a fader on 0 - you will not be able to read the other fader val-
ues. Press a DMX Channel button to complete the process and
return to normal operation.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Martin 2518 DMX Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Martin 2518 DMX Controller in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Martin 2518 DMX Controller

Martin 2518 DMX Controller User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info