Manual Marshall MG50FX Gold (page 3 of 57) (English, German, French, Spanish)

705316

Zoom out

Zoom in

1/57

PLEASE READ THIS MANUAL CAREFULLY

BEFORE PLUGGING IN.

FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.

KEEP THESE INSTRUCTIONS.

ENGLISH

This device complies with part 15 of the FCC Rules. Operaon is subject to the

following two condions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operaon.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protecon against harmful interference in a residenal

installaon.

This equipment generates, uses and can radiate radio frequency energy and, if not in-

stalled and used in accordance with the instrucons, may cause harmful

interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular

installaon. If this equipment does cause harmful interference to radio or

television recepon, which can be determined by turning the equipment o and on, the

user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modicaons not expressly approved by the party

responsible for compliance could void the users authority to operate the equipment.

This device complies with CAN ICES-3(B)/NMB-3(B)

COMPLIANCE STATEMENT (MG15FX, MG30FX & MG50FX) MG10 FRONT PANEL FUNCTIONS

1. INPUT

Input for your guitar. Use a good quality

guitar cable (i.e. one that’s screened/

shielded) to help prevent noise,

interference and unwanted feedback.

2. VOLUME - CLEAN CHANNEL

This control adjusts the volume of the

Clean Channel.

3. CHANNEL SWITCH

This switch allows you to change between

the amp’s two channels, Clean and

Overdrive, via the front panel. When

the LED is green, the Clean channel

is engaged. When the LED is red, the

Overdrive channel is engaged.

4. GAIN

This control sets the operating level of the

pre-amp. Simply turn up the Gain control

until the required amount of distortion is

achieved.

5. VOLUME - OVERDRIVE CHANNEL

This control adjusts the volume of the

Overdrive channel. The louder this

channel is set, the ‘looser’ the amplifier will

sound and feel.

6. CONTOUR

This highly effective tone control works by

modifying the mid-range (body).

7. HEADPHONE OUT

For use when silent practice is the order

of the day. Connection of headphones will

automatically mute the internal speaker.

8. MP3 IN

If you want to jam to your favourite track,

connect the line out or headphone output

of your player here, adjust the volume of

your player to match that of your guitar

and you’ve got the perfect ‘play-along’

practice system.

9. MAINS

The power switch turns your amplifier on

and off. The Channel switch will light up

when your amplifier is turned on and will

not be lit when the amplifier is switched

off.

Note: The specific mains input voltage rating

that your amplifier has been built for is shown

on the back panel. Before connecting to

the mains electricity supply, always ensure

that your amplifier is compatible with your

electricity supply. If you have any doubt,

please get advice from a qualified technician.

Your Marshall dealer will help you in this

respect.

Warning: Please ensure the amplifier is

switched off and unplugged from the mains

electricity supply before being moved.

1 2 3 4 5 6 7 8 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marshall MG50FX Gold in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 3,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marshall MG50FX Gold Manual

Product: