705301
9
Zoom out
Zoom in
Previous page
1/84
Next page
be set to 8 Ohms. If running into two 8
Ohm cabs, the amp should be set to 4
Ohms.
WARNING: Failure to comply with these
points may result in damage to the amplier.
16. MAINS SELECTOR
WARNING: Your amp should be completely
powered down before the MAINS
SELECTOR is turned.
The MAINS SELECTOR matches the
amplier to the incoming mains voltage.
Ensure that the mains selector is set to
the correct voltage applicable to the
country where the amplier is being
used. If you are unsure of the mains input
voltage contact your authorised Marshall
dealer.
WARNING: Failure to comply with these
points may result in damage to the amplier.
17. MAINS INPUT
Your amp is provided with a detachable
mains (power) lead which connects
here. The specic mains input voltage
rang that your amplier has been built
for is shown on the rear panel. Before
connecng for the rst me, please
ensure that your amplier is compable
with your electricity supply. If you have
any doubt, please get advice from a
qualied person. Your Marshall dealer
will help in this respect.
18. MAINS FUSE
The correct value of mains fuse is
specied on the rear panel of the
amplier.
19. H.T. FUSE
The correct value of H.T. fuse is
specied on the rear panel of the
amplier.
15 16 17 18 19
ENGLISH
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall JTM45 - 2245 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall JTM45 - 2245 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 6,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info