442787

Marshall JFX-1 Signal Processor Manual

13
Zoom out
Zoom in
Previous page
1/13
Next page
FRENCH
GERMAN
SPANISH
JAPANESE
ENGLISH
23
Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO 0 : Yes
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO x : No
Section 13 -
Re-Initialising the JFX-1
If at any time you wish to restore the programmed
information within the JFX-1 to the same condition in
which it left the factory it is possible to re-initialise it.
There are two types of re-initialisation:
1. For all 127 programs where the 50 factory pre-
sets would be restored to their original format and the
remaining programs are completely cleared.
2. Restoring the first 50 factory pre-sets without
affecting data programmed into programs 50 - 127.
Warning :
As re-initialisation clears all custom
programmed information you must make a back-up or
written note of any program information you wish to
keep.
To restore programs 00 - 49 (leaving programs 50 -
127 untouched).
Press the ‘Store’ button as you switch the power
on.
To re-initialise the whole system including re-
storing the 50 factory pre-set programs, clearing the
remaining memories and re-setting the mapping table.
Press the ‘Down’ key and ‘Store’ key as you
switch the power on.
The JFX-1 will now have it’s memory configured
to the same specification as that with which it
originally left the Marshall factory.
Section 14 - JFX-1 Specifications
Frequency Response : 20 Hz - 20 KHz + or - 1dB
Dynamic Range : 94dB
Processing : 24 bit
Storage / Converters : 16 bit
Input Impedance : 470 K
Output Impedance : 470 Ohms.
FRENCH
GERMAN
SPANISH
JAPANESE
ENGLISH
Function Transmitted Recognised Remarks
Basic Default 1 Omni Memorised
Channel Altered 1 - 16 1 - 16
Default x Mode 1
Mode Message x x
Altered x x
Note x x
Number True Voice x x
Velocity Note ON x x
Note OFF x x
After Key’s x x
Touch Channels x x
Pitch Bender x x
Control Change x 0
Program 0 - 127 0 - 127 Input / Output
Change True 0 - 127 0 - 127 Mapping Programmable
System Exclusive 0 0 * See Note
System : Song Pos x x
: Song Sel x x
Common : Tune
System : Clock x x
Real Time : Commands x x
Aux. Messages : Local ON/OFF x x
: All Notes OFF x x
Common : Active Sense x x
: Reset x x
* Notes System Exclusive Recognised when System Exclusive is enabled.
Power
Store
Power
Store
➤
Section 16 -
MIDI Implementation Chart
Program No. Name
000 BYPASS
001 concert hall
002 bright plate
003 dark plate
004 live room
005 chs - dly - rev 1
006 chs - dly - rev 2
007 st - chorus
008 st - flange
009 ping - pong 1
010 ping - pong 2
011 ping - pong 3
012 chs - rev 1
013 chs - rev 2
014 chs - rev 3
015 space echo -1
016 space echo -2
017 multi - tap 1
018 multi - tap 2
019 multi - tap 3
020 multi - tap 4
021 garage
022 theatre
023 blues room
024 big reverb
025 800 m. sec
026 1660 m. sec
027 200 - 220 m. sec
028 400 - 420 m. sec
029 800 - 820 m. sec
030 st - double
031 flange - dly
032 flange - echo
033 chorus blues
034 flange blues
035 ambience
036 mod - delay
037 six voice 1
038 six voice 2
039 memory man
040 delay duck
041 metal chorus
042 metal flange
043 country slap
044 fade left
045 fade right
046 rhythm tap 1
047 rhythm tap 2
048 chs - rvb - dly 3
049 chs - rvb - dly 4
Section 15 - Factory Pre-Sets
22
… 13


Need help? Post your question in this forum.

Forumrules
1

Forum

marshall-jfx-1-signal-processor

Reset search

  • how to get the sound effect out of the marshall jfx1 Submitted on 22-1-2023 at 12:06

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall JFX-1 Signal Processor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall JFX-1 Signal Processor in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info