705305
3
Zoom out
Zoom in
Previous page
1/40
Next page
WARNING:
Before going any further, make sure
that your amplifier is compatible with
your electricity supply. If you have any
doubt, please seek help from a qualified
technician – your Marshall dealer can
help you in this respect.
MAINS INPUT & FUSE:
Your amplifier is provided with a
detachable mains (power) lead which
should be connected to the Mains Input
socket on the rear panel of the amplifier.
The specific mains input voltage rating
that your amplifier has been
manufactured for is indicated on the
rear panel of the amplifier.
The correct value and type of mains
fuse is specified on the rear panel of the
amplifier.
NEVER attempt to bypass the fuse or fit
one of the incorrect value or type.
TRANSPORTING YOUR EQUIPMENT:
Please ensure that your amplifier is
switched off, unplugged from the mains
electricity supply and all removable
cables have been disconnected from
your equipment before attempting to
move it.
IMPORTANT SET UP INFORMATION:
1. Make sure that the speaker
cabinet(s) impedance matches that of
the amplifier. See IMPEDANCE
SELECT in this manual (Rear Panel
Functions #6). Always use a proper
speaker cable. Never use a screened
(shielded) guitar cable for this
purpose.
NOTE: Before connecting or
disconnecting the speaker cabinet(s)
you MUST switch the amplifier off
and disconnect it from the mains
electricity supply. Switching on
without a speaker plugged in will
damage the amplifier.
2. Ensure that the VOLUME controls on
the front panel are set to zero.
3. Connect the supplied mains (power)
lead into the MAINS INPUT on the
rear panel first and then into the
mains electricity supply. (Rear Panel
Functions #13)
4. Plug your guitar into the INPUT jack
socket on the front panel.
5. Turn the front panel POWER on
(Front Panel Functions #15) and wait
for a few minutes before going to
point 6 below,
6. After waiting, engage the STANDBY
switch (Front Panel Functions #14).
7. Turn the VOLUME controls up to
your preferred level and your amp is
ready to play.
WARNING! IMPORTANT SAFETY INSTRUCTIONS
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall JCM 900 - 4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall JCM 900 - 4100 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info