705274
4
Zoom out
Zoom in
Previous page
1/6
Next page
1. INPUT
Input jack socket for your guitar cable.
Use a good quality screened/shielded
guitar cable to help prevent noise
interference.
CLASSIC GAIN CHANNEL
2. GAIN
Controls the gain level for the CLASSIC
GAIN channel. As the amount of gain
increases, so will the distortion level in
your sound.
3. VOLUME
Controls the volume level of the
CLASSIC GAIN channel.
4. CHANNEL SELECT
Press to switch between CLASSIC GAIN
and ULTRA GAIN channels:
The CLASSIC GAIN channel status LED
will light green to indicate that CLASSIC
GAIN channel is selected.
The ULTRA GAIN channel status LED
will light red to indicate the ULTRA GAIN
channel is selected.
Note: Channels can be selected using the
supplied 2-way footswitch.
ULTRA GAIN CHANNEL
5. GAIN
Controls the gain level for the ULTRA GAIN
channel. As the amount of gain increases, so
will the distortion level in your sound.
6. VOLUME
Controls the volume level of the ULTRA
GAIN channel.
EQUALISATION SECTION
7. TONE SHIFT
Tone Shift recongures the preamp EQ
network adding a new dimension to
tonal shaping.
8. TREBLE
Controls higher frequencies of your
sound. Turning clockwise will increase
the highs making the sound brighter and
more crisp.
9. MIDDLE
Controls the middle register of your
sound. Turning clockwise adds girth.
Turning anticlockwise reduces the
middle frequencies ‘scooping’ the
sound – this is accentuated when used in
conjunction with Tone Shift (Front Panel
Function #7).
FRONT PANEL FUNCTIONS
10. BASS
Controls the amount of lower frequency,
or bottom-end, in your sound. Turning
clockwise will increase the bottom-end
making the sound fuller.
11. DEEP
When pressed in, the Deep switch adds
a resonant bass boost to your sound,
increasing the bottom-end making the
tone fatter.
Tonal Note: The preamp EQ network is
dynamic and highly interactive. Please note
that because of this, altering the setting of
one control can change the way that the
other controls behave – experiment to nd
your sound.
12. REVERB
Controls the overall REVERB level.
13. POWER
Mains power switch.
DSL5CR FRONT PANEL
1 2 3 4 5 6 7 8 9 10 11 12 13
ENGLISH ENGLISH
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall DSL5CR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall DSL5CR in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info