671530
12
Zoom out
Zoom in
Previous page
1/69
Next page
ENGLISH ENGLISH
GUITAR TUNER
Pressing the PRE FX and AMP Section Switches (#15 & #16 in this manual) together
accesses the guitar TUNER:
• Pluck a string and the note you are playing will display.
• Tune the string until the name of the note you wish to tune to appears on the screen.
• The bar will move to the left if the note is at. The bar will move to the right if the note is
sharp.
• When the bar is dead centre, that string is tuned to the displayed note.
• Press EXIT/STORE to exit the Tuner.
FACTORY RESET
Performing a factory reset will return CODE’s Presets back to when it was new.
To perform a factory reset:
• Power OFF the amplier using the ON/OFF switch (#14 in this manual).
• Whilst holding down the AMP Section Switch, turn the power ON.
• The screen will display a notication that the amplier is about to be returned to its
factory settings.
• If you are sure that you want to perform a factory reset, press and hold the EXIT/STORE
switch to conrm.
If you do not want to restore the factory presets, pressing any other switch will cancel the
factory reset operation and boot the amplier as normal.
A:>>|<<
A:>>|<<
A:>>|<<
DECLARATION OF CONFORMITY
Before performing a factory reset, be sure that you want to overwrite all of your personal
Presets.
!
Manufacturer:
Marshall Amplication Plc,
Denbigh Road,
Bletchley,
Milton Keynes,
Bucks,
United Kingdom
MK1 1DQ
Kind of equipment: Audio Equipment
Type designation: CODE25, CODE50
We, Marshall Amplication Plc, declare under our sole responsibility that the above listed products complies with the following
Directives:
1. EMC Directive 2014/30/EU;
2. Low Voltage Directive (LVD) 2014/35/EU;
3. R&TTE Directive 1999/5/EC.
The following harmonised standards have been applied:
1. EMC
• EN 55013:2013
• EN 55020:2007+A11:2011
• EN 61000-3-2:2014
• EN 61000-3-3:2013
2. LVD • EN 60065:2014
Health &
Safety
(Article 3(1)(a))
• EN 62479:2010
• EN 60065:2002 + A1:2006 + A11:2008 + A2:2010 +A12:2011
EMC
(Article 3(1)(b))
• ETSI EN 301 489-1 V1.9.2:2011
• ETSI EN 301 489-17 V2.2.1:2012
Spectrum
(Article 3(2))
• ETSI EN 300 328 V1.9.1:2015
3. R&TTE
Signature: Name: B. Moon Date: 2nd May 2016
Name of the responsible party: Jam Industries USA, LLC
Address of the responsible party: 1649 Barclay Blvd, Buffalo Grove, IL 60089, United States of America.
Telephone number of the
responsible party:
800-877-6863
Name of equipment: MD116D Guitar Ampliers
Model No.: CODE25, CODE50
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
16
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall Code 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall Code 50 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 6,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marshall Code 50

Marshall Code 50 User Manual - English - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info