705292
53
Zoom out
Zoom in
Previous page
1/62
Next page
前面板功能(续上)
8. MASTER (主音量控制器)
控制 CODE 放大器的总音量。
主音量控制器设置不作为预设的一部
分储存。
9. PRESET (预设)
预设是一组储存在 CODE 放大器内存某个
位置的有关前置放大器、功率放大器和扬
声器模型的信息,其中包含音色设置和合
(Chorus)、飘忽 (Flanger)、颤音 (Trem-
olo)、延迟 (Delay) 等效果。它就像是整个
放大器设置(不包括主音量)的快照
可通过预设 (PRESET) 选择器或使用可选
CODE 脚踏控制器调用。
旋转预设 (PRESET) 选择器可查看 CODE
放大器的工厂预设。
10. EDIT (编辑)
使用编辑 (EDIT) 选择器对预设进行详细编
辑。按下编辑 (EDIT) 选择器,预览已储存
的增益、低音、中音、高音和音量设置。
旋转编辑 (EDIT) 选择器,查看当前分段开
关设置。
如需了解如何编辑预设,请参阅本手
册的编辑预设部分。
11.F/C
使用该插孔连接随机附带的 2 路脚踏开关
切换预设值,或连接 CODE 可编程脚踏控
制器(PEDL-91009 单独出售)。
12. MP3 PLAYER INPUT (MP3 播放器输入插孔)
使用此专用迷你插孔连接音频播放器,以
便使用其中的音乐练习或在演奏的同时播
放其中的音乐。
13. HEADPHONE OUTPUT (耳机输出插孔)
使用此迷你插孔连接耳机,以进行静音
练习。此插孔也可用作线路输出插孔。
14. ON/OFF (电源开关)
这是主电源开关。
分段开关 (15-21)
分段开关分别代表吉他信号链中的不同分段。这是吉他信号从吉他穿过传统放大器设
备流向扬声器的路线。
功率放大器
音箱
前置放大器
简体中文
!
!
Marshall
STOMPBOX
MOD
DELAY
REVERB
15
16
16
17
18
19
20
21
1718
19
20
21
15
Marshall
STOMPBOX
MOD
DELAY
REVERB
15
16
16
17
18
19
20
21
1718
19
20
21
15
按分段开关(本手册中的第 15-21 项)
将激活(红色 LED 指示灯亮起)和绕过
LED 指示灯熄灭)相应分段。
前面板功能(续上)
15. PRE FX (前置效果器)
这种效果器通常插入布置在吉他与放大器输入之间的传统放大器中。一般采用踏板的形
式,也称为单块效果器。前置效果器分段的单块效果器包括:
压缩效果器
压缩效果器影响声音信号的动态范围。CODE 的压缩效果器用于降低或压缩任何
峰值高于特定阈值的吉他声音部分。其他处于阈值以下的吉他声音部分不受任何影
响。压缩效果器可以增加吉他清音或过载声音的清晰度和连贯性。压缩效果器的可
编辑参数为:
“单块效果器”
A:>>|<<
A:>>|<<
简体中文
参数 值范围 描述
Tone (音色) 0 - 10
调节压缩效果器的高、低频率。
Rao (比率) 0 - 10
控制对超过阈值的信号施加的压缩量。
Compression
(压缩)
0 - 10
调节向信号施加压缩的节点。
Level (音量) 0 - 10
控制压缩效果器的总音量。
失真效果器
CODE 失真效果器的三种模式模拟了固态失真和过载效果踏板。GUV 模式是带有
Drive (驱动)Tone (音色)控制器的 Marshall Guv'nor™ODR DIS 模式提供经
典过载和失真效果器的味道。失真效果器与经典和复古 MST 前置放大器模型配合
使用可产生最佳效果,驱动感和持久度均得到增强。失真效果器的可编辑参数为:
参数 值范围 描述
Mode (模式) GUV
ODR DIS
Marshall Guv'nor、经典过载踏板和经典失真踏板。
Drive (驱动) 0 - 10
控制向信号施加的过载或失真量。
Tone (音色) 0 - 10
在信号到达放大器面板音色控制器前,调节过载或失
真的中上和高频含量。
Level (音量) 0 - 10
控制失真的总音量。
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall Code 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall Code 100 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 13,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info