Manual Marshall Code 100 (page 11 of 62) (English, German, French, Spanish)

705292

Zoom out

Zoom in

1/62

24. MAINS INPUT

Connects the amplier to the mains power supply.

25. FX LOOP

Connect external FX pedals or a signal processor here. The FX LOOP is post DSP in the

signal chain.

26. SPEAKER OUTPUT (CODE100H ONLY)

Connect a speaker cabinet here.

IMPORTANT - Do NOT connect a speaker cabinet of less than 8 Ohm, and NEVER use

CODE100H without a spekaer cabinet connected.

ENGLISH

EDITING A PRESET

• Hold down the Section Switch that you wish to edit (#15 - #21 in this manual).

• The display screen will show the current section’s settings.

• Turn the EDIT selector (#10 in this manual) to scroll through the different options within

the current

section: CL DSL, Plexi, JCM800, OD Silver Jubilee in AMP, or Chorus, Flanger,

Phaser, Tremolo in MOD, or Studio, Vintage, Multi, Reverse in DEL, for example.

• Push the EDIT selector to begin editing.

STORING A PRESET

To store an edited Preset, Store an edited Preset to a new location, and to rename an

edited Preset:

• When you have nished editing, press & hold EXIT/STORE briey until the Preset name

begins to auto-scroll to the left into the Preset number.

• If you wish to store your edited Preset to another location, turn the PRESET selector to

nd a new location, then press & hold EXIT/STORE until STORED appears on the display

screen.

Speaker cabinet models are not editable.

To learn how to store an edited Preset, refer to STORING A PRESET in this manual.

If you wish to keep your edited settings ensure that you store before moving off that

Preset.

Be sure that you want to store to the Preset location that you have selected, as the Preset

in that location will be overwritten.

To edit PRE FX, AMP, MOD, DEL, REV, POWER and CAB section settings:

ENGLISH

To rename the edited Preset and store to the current location:

• While the Preset name auto-scrolls to the left, press & hold EXIT/STORE again briey

until the Preset name is displayed with arrows above and below the rst letter or

character.

• Turn the EDIT selector to change the letter or character.

• Turn the PRESET selector to move to the next letter or character, or back to a previous

letter or character.

• Repeat until you have renamed the Preset.

REAR PANEL FUNCTIONS

• Turn the EDIT selector to edit the highlighted parameter. You will see the parameter

value change on the screen as you turn.

• When you are happy with your edited parameter value, push the EDIT selector to move

to the next parameter (if there is one).

• Turn the EDIT selector to edit the newly highlighted parameter.

• Repeat for all parameters and parameter values of the Sections that you wish to edit.

• When you are happy with your edited Preset you can store it to your CODE amplier’s

memory.

• If you wish exit without storing your edits, press EXIT/STORE (# 22 in this manual).

This will return you to the main Preset screen.

EDITING A PRESET (CONT.)

24 25 26

The MAINS INPUT socket has an integrated fuse compartment. Ensure that the value

of a replacement fuse matches the labelling on the amplier rear panel. You MUST

ALWAYS switch the amplier OFF and disconnect it from the mains electricity supply

before attempting to access the fuse compartment. If in doubt, contact your Marshall

Dealer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marshall Code 100 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 13,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marshall Code 100 Manual

Product: