442739

Marshall Audiostate Manual

6
Zoom out
Zoom in
Previous page
1/11
Next page
5
LR150 Top Panel Features (page38)
AUDIOSTATE
LR150
ENGLISH
Channel 1 & Channel 2
1. & 5. Low
Controls the low frequencies on Channel 1 and
Channel 2 respectively.
2. & 6. High
Controls the high frequencies on Channel 1 and
Channel 2 respectively.
3. & 7. Effect
When using the in-built reverb on the LR150 this
control will adjust the amount of reverb on
Channel 1 and Channel 2 respectively. When
using an external effects processor this will
control the amount of effected signal, as it
dictates the amount of signal to the Effects Send
(item 10) on the rear panel.
Note - this will be effected by the Effect Return
control (item 19) and the Master Reverb control
(item 20).
4. & 8.Volume
Controls individual volume level for channel 1
and 2 respectively. Overall volume will be
governed by the Master Volume control (item
21).
Channel 3 & Channel 4
9. & 14. Low
Controls the low frequencies on Channel 3 and
Channel 4 respectively.
10. & 15. Mid
Controls the mid frequencies on Channel 3 and
Channel 4 respectively.
11. & 16. High
Controls the high frequencies on Channel 3 and
Channel 4 respectively.
12. & 17. Effect
When using the in-built reverb on the LR150 this
control will adjust the amount of reverb on
Channel 3 and Channel 4 respectively. When
using an external effects processor this control
will control the amount of effected signal, as it
dictates the amount of signal to the Effects Send
(item 10) on the rear panel.
Note - this will be effected by the Effect Return
control (item 19) and the Master Reverb control
(item 20).
13. & 18. Volume
Controls individual volume level for channel 3
and 4 respectively. Overall volume will be
governed by the Master Volume control (item
21).
Master Section
19. Effect Return
This is the master Effects Return and is an effects
mix control, allowing you to decide when using
an external effects processor how much of your
overall sound will be effected. Further control is
given by the individual Effect control which
features on each channel.
20. Master Reverb
The LR150 comes complete with an in-built
spring reverb. The overall reverb level for the
combo is set here, with independent controls
featuring on each channel allowing you to set
independent levels for each channel.
21. Master Volume
The overall volume of the combo is set here. As
with effects and reverb, there is an independent
control on each channel allowing you to set
independent volume levels for each channel.
This will not however affect the level of the Line
Out Jack on the rear panel (item 12).
22. LED
Indicates operating status of combo.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall Audiostate at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall Audiostate in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info