705263

Marshall 2525H Manual

7
Zoom out
Zoom in
Previous page
1/54
Next page
1. LOUDSPEAKERS
There are ve speaker outputs available.
These are 1/4” jack sockets. They are
labelled according to the intended
impedances:
• 16Ω: connect a 16 Ohm guitar cabinet
to this jack.
• 8Ω: connect a single 8 Ohm guitar
cabinet or two 16 Ohm cabinets.
• 4Ω: connect a single 4 Ohm guitar
cabinet or two 8 Ohm guitar cabinets.
Warning: although the amplier has
ve speaker outputs, never attempt to
connect more speakers than rated. The
safe combinations are: 1 x 16 Ohm, 1 x 8
Ohm, 1 x 4 Ohm, 2 x16 Ohm or 2 x 8 Ohm.
Any other speaker conguration may
stress the power amplier section and in
extreme cases may lead to valve and/or
output transformer failure.
Never use the 2525 without a speaker
load.
2. DI OUTPUT
A DI output allows you to connect to
recording device or sound desk.
Note: using the DI does not omit the need
for a speaker to be connected. See the
warning on rear panel function 1.
3. FOOTSWITCH
Connect the channel footswitch here
(PEDL-90003, supplied).
4. FX LOOP
The series FX loop connects the amp to
external FX (nominal level -10dBV). The
send jack socket connects to the input
of the external FX unit and the return
jack socket connects to the output of the
external FX unit.
Note: the send jack socket can be used
to connect to an external power amp. This
does not omit the need for a speaker to be
connected to the amplier’s output stage.
See the warning on rear panel function 1.
The return can be used to connect an
external preamp.
2525H (COMBO SHOWN ON NEXT PAGE)
ENGLISH
4.0
REAR PANEL FUNCTIONS
PANL-00370 Iss A
RETURNSEND
MAINS INPUT
230V ~ 50Hz
100 WATTS
FUSE
230V - T1AE250V
100-130V - T2AE250V
MODEL:
2525H
1 x 16 OHM
“CLASS 2 WIRING”
CONNECT SPEAKERS
BEFORE USE
OUTPUT: 20 WATTS RMS
LOUDSPEAKERS
FX LOOP
1 x 8 OHM
2 x 16 OHM
1 x 4 OHM
2 x 8 OHM
HT FUSE
T315mAE250V
FOOTSWITCHD.I.
1 2 3 4 5 6
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall 2525H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall 2525H in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 8,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info