Manual Marquant mrp 01 (page 6 of 27) (English, Dutch, French)

161821

Zoom out

Zoom in

1/27

B) ALL FILES DELETE

1. PRESS AND HOLD THE “ INFO “ BUTTON FOR 3 SECONDS AND THE LCD DISPLAY (7) WILL SHOW (DEL

---001)

2. PRESS AND HOLD THE “ INFO “ BUTTON TO ENTER “ YES / NO “ MODE AND THEN PRESS SKIP

FORWARD

OR SKIP BACKWARD TO SELECT “ YES “ OR “ NO “.

3. PRESS THE “ REC “ BUTTON AGAIN TO CONFIRM THE SETTING.

REMARK : ALL THE FILES INSIDE THE USB STORAGE MEDIA OR SD CARD WILL BE DELETED COMPLETELY

AFTER CONFIRMING TO “ YES “ MODE.

REMOVING OF USB / MEMORY CARD

TO REMOVE THE USB / MEMORY CARD, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO

EITHER CD, AUX OR TUNER FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET

DIRECTLY, FOR MEMORY CARD – PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD

BEING PARTIALLY EJECT AND YOU CAN REMOVE IT BY HAND.

PHONO

A) OPERATION

- REMOVE THE STYLUS PROTECTOR.

- BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM

REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.

1. SELECT TO “ PHONO ” FUNCTION FROM FUNCTION SELECTOR (13)

2. SET THE SPEED SELECTOR (24) TO THE PROPER POSITION DEPENDING ON THE RECORD TO BE

PLAYED.

3. PLACE THE RECORD ON THE PLATTER (USE THE SPINDLE ADAPTOR IF REQUIRED).

4. SET THE CUEING LEVER (22) TO THE UP POSITION.

5. LIFT THE TONE ARM FROM THE REST AND SLOWLY MOVE IT TO THE RECORD SIDE. THE PLATTER WILL

START TO ROTATE AND POSITION THE TONE ARM OVER THE DESIRED POSITION OF THE RECORD.

6. PULL DOWN THE CUEING LEVER (22). THE TONE ARM WILL COME SLOWLY ON THE RECORDER AND

START PLAYBACK.

7. AT THE END OF RECORD, THE TONE ARM WILL RETURN TO THE REST POSITON AUTOMATICALLY.

8. TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE REST.

z PLAY SUSPENSION

SET THE CUEING LEVER (22) TO THE UP POSITION WILL LIFE UP THE TONE ARM AND THEN STOP

PLYABACK TEMPOARILY

z PLAY EJECTION

PRESS THE EJECT BUTTON (12) ANYTIME DURING PLAYBACK WILL RETURN THE TONE ARM TO

THE REST POSITION IMMEDIATELY.

Remark :

- DUE TO THE LENGTH OF THE RECORD IS VARIOUS, IF YOU FIND THE TONE ARM CANNOT

RETURN AUTOMATICALLY AFTER PLAYBACK OF RECORD. PLEASE PRESS THE EJECT

BUTTON AND RETURN THE TONE ARM BACK TO THE REST POSITION

- USERS SHOULD NOT CHANGE TO A MAGNETIC CARDRIDGE SYSTEM, OTHERWISE UNIT CAN´T

BE CONNECTED ANYMORE TO AN AUX-IN OF MUSIC-CENTER

B) ADJUSTMENTS

ANTI-SKATING CONTROL

- SET THE ANTI-SKATING CONTROL (21) TO THE POSITION WHICH CORRESPONDING TO THE ADJUSTED

STYLUS WORKING PRESSURE. IF THE WORKING PRESSURE IS 2 GRAMS, THE ANTI-SKATING

CONTROL ALSO TO BE SET AT 2.

PLATTER SPEED ALIGNMENT

- DULYING PLAYBACK OF RECORD, OBSERVE THE APPROPIATE STRIP OF STOBE CALIBRATION DOTS

FROM THE STROBE LENS. THE UPPER ONE IS FOR 33 RPM AND THE MIDDLE ONE IS FOR 45 RPM.

- IF THE STROBE DOTS APPEAR TO FLOWING TO THE RIGHT, IT MEANS THE PLATTER IS REVOLVING

SLOWER THEN RATED SPEED. TURN THE PITCH CONTROL (25) TO THE “ + “ DIRECTION. IF THE

STROBE DOTS APPEAR TO FLOWING TO THE LEFT, IT MEANS THE PLATTER IS REVOLVING FASTER

THAN RATED SPEED. TURN THE PITCH CONTROL (25) TO THE “ – “ DIRECTION.

- ADJUST THE PITCH CONTROL (25) UNTIL THE STROBE DOTS DO APPEAR TO BE STATIONARY WITHOUT

MOVING LEFT OR RIGHT.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marquant mrp 01 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marquant mrp 01 Manual

Product: