522866
17
Zoom out
Zoom in
Previous page
1/53
Next page
ALC is usually not desired when recording music
(voice or instrument) because the transitions in
input level may be audible in the recording, and
can make the recording ‘hissy’ by raising the level
during quiet passages and recording ambient
noise.
The REC LEVEL controls do not work when the
LEVEL CONT. switch is set at ALC.
US default: LEVEL CONT. switch at ALC.
Europe default: LEVEL CONT. switch at
MANUAL.
MIC ATTEN
0dB
-20dB
FLAT
ANC
LEVEL CONT.
LIMITER
ALC
MANUAL
OFF
ON
EDL PLAY
STEREO
L
ANALOG OUT
R
OFF
ON
AUTO MARK
OFF
ON
PRE REC
MARK
A-B REPEATINPUT
EDIT
SINGLE
OFF
ALL
OFF
ON
INPUT LOCK
14
a
INPUT
TIME
REC REMAIN
L
R
-dB
over
0
26
1220
40
00
-dB
INT
MIC
- 17 -
14. INPUT button
The INPUT button lets you
select the audio input and
audio channels for record-
ing.
When the INPUT LOCK switch (a) is at OFF,
press and release the INPUT button to tab
through the input choices. When the desired
input is displayed switch the INPUT LOCK
switch (a) to ON.
Example
display:
mono with INT MIC
The nine input choices are:
mono with INT MIC input
stereo with LINE input
mono with LINE input (L only)
LR mono with LINE input (L + R mix)
DigiIn (digital input)
stereo with MIC input
DLmono with MIC input (dual level mono, L
only)
mono with MIC input (L only)
LRmono with MIC input (L + R mix)
Note: The PMD670 'listens' only to the selected
input. For example if the input selected is
LRmono with LINE input, and no input source is
connected to the LINE IN jacks the PMD670 will
record silence.
US default: mono with INT MIC input.
Europe default: stereo with MIC input.
What the input selections do:
Selects the input device(s) and channels
The input selection chooses which input(s) the
PMD670 is using for recording and how many
channels are recorded.
Selects the recording (file) parameters
The input selection also determines which set of
algorithm/file parameters are used (stereo file,
mono file, or digital file).
Recording (file) parameters:
stereo (recorded as a stereo file): stereo with
LINE input, stereo with MIC input, DLmono with
MIC input.
mono (recorded as a mono file): mono with INT
MIC input, mono with LINE input, LR mono with
LINE input, mono with MIC input, LRmono with
MIC input.
digital (recorded as a digital file): DIGITAL IN
input.
The default algorithm/file parameters are:
stereo file: MP2, 48kHz sample frequency,
128kbps per channel, and file extension .mpg.
mono file: MP3, 44.1kHz sample frequency,
32kbps, and file extension .mp3.
digital file: MP2, 44.1kHz or 48kHz sample
frequency (dependent on input source rather than
default or PMD670 menu selection), 128kbps,
and file extension .mpg.
Via the Algor/File Menu choice, the algorithm/file
parameters for stereo, mono or digital files can
be changed. See Algor/File Menu choice on page
29.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marquant Model PMD670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marquant Model PMD670 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info