38709
8
Zoom out
Zoom in
Previous page
1/21
Next page
5
you cancel the repeat function by pressing the REPEAT button until the REPEAT
indicator goes “OFF” or press the STOP button twice.
To repeat the entire disc, press the REPEAT button twice. The REPEAT indicator
will light up. Then press the PLAY / PAUSE
button to begin playback if
necessary. The entire disc will be repeated continuously.
To cancel Repeat Playback press the REPEAT button until the REPEAT indicator
goes “OFF”. Opening the CD door or switching the FUNCTION selector to “OFF”
also can cancel repeat.
PROGRAMMED PLAYBACK
You can program up to 16 tracks to play in any order you choose. To program
tracks for playback the player must be in the Stop mode. If the disc is playing,
press the STOP button to stop playback and then proceed as follows:
1. Press the PROG button once. The “PROGRAM” indicator and
“PR” will start flashing.
2. Use the SKIP / SEARCH FWD or REV buttons to select the
first track to be programmed.
Example: Track 7.
The “PROGRAM” indicator keeps flashing.
3. Press the PROG button again. This will store track 7 into
program memory. The “PROGRAM” indicator and “PR” flashing
again.
4. Repeat steps 2 and 3 until you have programmed up to a
maximum of 16 tracks into the program memory.
5. To begin Programmed Playback press the PLAY / PAUSE
button. The
PROGRAM” indicator stop flashing and remains on. The player will begin to
play the tracks in the order that you selected.
NOTES:
Pressing the STOP button during Programmed Playback will stop
playback but the Programmed tracks are still in memory.
Press PLAY / PAUSE
button to continue Programmed Playback.
To cancel Programmed Playback, press the STOP button while in Stop
mode.
Programmed Playback can also be canceled by opening the CD door, setting
the FUNCTION selector to the “OFF” position or by disconnecting the AC
POWER cord.
When 16 tracks have been entered, the CD memory is full. If you try to select
other tracks, the “PROGRAM” indicators continue flashing but no other track
numbers appear in the display.
To check the program order, press the PROG button once more. The display
will show each track number in the order that they were programmed.
NOTE ON CD-R / RW DISCS
Because of non-standardized format definition / production of CD-R / RW,
playback quality & performance are not guaranteed.
Do not attach a seal or label to either side (the record able side or the labeled
side) of a CD-R / RW disc. It may cause malfunction.
Do not load an un-recorded CD-R / RW disc. It will take over 30 seconds to
read the disc. The disc may be damaged if you try to open the CD Door while
reading the disc.
7
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marquant MKB01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marquant MKB01 in the language / languages: Dutch as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info