38692
5
Zoom out
Zoom in
Previous page
1/26
Next page
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL.
IMPORTANT:
SINCE MOVEMENT OF THE CD MECHANISM AND THE SENSITIVE CIRCUITY MAY CAUSE INTERFERENCE TO
THE RADIO TUNER NEARBY, SWITCH THIS UNIT OFF WHILE OPERATING OTHER RADIO DEVICES.
PRECAUTION FOR USE
INSTALLATION
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
DO NOT CONNECT THE UNIT TO THE MAIN BEFORE CHECKING THE MAIN VOLTAGE AND BEFORE ALL
OTHER CONNECTIONS HAVE BEEN MADE.
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT THE AC POWER CORD (28) TO AC OUTLET
2. WHEN YOU FIRST PLUG THE UNIT INTO THE MAINS, THE UNIT WILL GO INTO STANDBY MODE AND THE
LED INDICATOR (14) WILL LIGHT UP, THE DISPLAY WILL SHOW “ -- --: -- -- “ AND FLASHING.
3. CONNECT THE SPEAKER WIRE TO THE SPEAKER TERMINAL (27) LOCATED ON THE REAR SIDE OF UNIT.
4. TURN ON THE POWER (6), IF THE LCD DISPLAY IS ON WITH BACKLIGHTING, IT MEANS THE POWER
SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC.
SETTING THE CLOCK
1. SET UNIT IN STANDBY MODE.
2. PRESS & HOLD THE “MEM/CLK-ADJ” BUTTON (16) FOR FEW SECONDS, THE DISPLAY WILL START
FLASHING. PRESS
OR BUTTON (4) TO SELECT THE APPROPIATE AREA HOUR (12H/24H)
3. PRESS “MEM/CLK-ADJ” BUTTON (16) AGAIN, THE FIRST SECOND DIGIT OF “00” IS FLASHING. PRESS
OR BUTTON (4) TO SET THE CORRECT HOUR. PRESS ”MEM/CLK-ADJ” BUTTON (16)TO STORE THE
CORRECT HOUR.
4. THE THIRD FOURTH DIGIT OF “00” IS FLASHING, PRESS THE
OR BUTTON (4) TO SET THE
CORRECT MINUTES. THEN PRESS “MEM/CLK-ADJ” (16) TO STORE THE CORRECT MINUTE.
¾ THE PRE-SET TIME WILL BE RE-SET COMPLETELY IF DIS-CONNECTING THE MAIN POWER
SUPPLY. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
LISTENING TO RADIO
MANUAL TUNING
1. PRESS FUNCTION BUTTON (7) TILL IT REACH “ TUNER ” MODE.
2. PRESS “BAND” BUTTON (20) TO SELECT DESIRED BAND (MW OR FM).
3. TUNE TO THE REQUIRED STATION BY PRESSING THE TUNING “” OR “” BUTTON (4).
4. ADJUST VOLUME CONTROL (18) TO THE DESIRED VOLUME LEVEL.
AUTO TUNING
1. PRESS FUNCTION BUTTON (7) TILL IT REACH “ TUNER ” MODE.
2. PRESS “BAND” BUTTON (20) TO SELECT DESIRED BAND (MW OR FM).
3. PRESS AND HOLD THE TUNING “” OR “” BUTTON (4) FOR 1-2 SECONDS AND THEN RELEASE.
4. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTIL A RADIO STATION IS REACHED.
5. REPEAT STEP 3 & 4 UNTIL THE DESIRED RADIO STATION IS BEING REACHED.
6. ADJUST VOLUME CONTROL (18) TO THE DESIRED VOLUME LEVEL.
E-3
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marquant MHA047 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marquant MHA047 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info