38506
26
Zoom out
Zoom in
Previous page
1/92
Next page
26
OPERATION
TA interruption function
When listening the traffic
announcement, if you press the TA
button, the traffic announcement will
be interrupted, but the TA mode is still
on. In this mode, you can press
MODE button to change mode to TA
mode and listen to traffic
announcement. Press TA button again
will stop the current traffic
announcement. And the unit will return
to its original station.
The RDS data used are the PI, PS, AF,
TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast station name data
expressed in alphanumerically
characters
AF: Alternative Frequencies
Frequency list of broadcasting
stations transmitting the same
program
TP: Traffic Program Identification
Identification data for traffic
information-broadcasting station
TA: Traffic Announcement
Identification
Identification data showing traffic
information is being transmitted
or not
PTY: Program Type Code
Contents of programs such as
news, light music, sports etc.
AV OPERATION
Switching to AV mode
There is a pair of AUDIO/VIDEO INPUT
jacks on the front and back of the unit.
When you connect an audio/video system
through these jacks, press MODE button
on the remote control or on the front panel
to select AV mode.
USB PLAY OPERATION
On the front panel of the unit, there is an
USB socket. An USB driver can be
connected through this interface.
1) When there is no disc in the disc slot,
connect an USB driver to the USB
interface, and change the mode to
MEDIA mode, the unit will read the files
stored in the USB device automatically.
When reading an USB device, if insert
a disc to disc slot, the unit will read the
disc automatically.
2) If there is a disc in the disc slot,
connecting an USB driver to the USB
interface, when changing the mode to
MEDIA mode, the unit will play the disc.
Press
(stop) or (pause) button on
the remote control or /MUT on the
front panel to enter PRE-STOP, STOP
or PAUSE mode, then press GOTO
button to read the USB device.
* When reading the USB device, Press
(stop) or (pause) button on the
remote control or /MUT on the front
panel to enter PRE-STOP, STOP or
PAUSE mode, then press GOTO button
will play the disc.
* When reading the USB device,
disconnect the USB device, the unit
will play the disc automatically.
The main unit can only support the
standard USB-memory disc which
is approved by Microsoft.
USB MP3 player is not a standard
which means different brand name
or different models have their own
standard. So our product cannot
support every MP3 player.
When connecting an MP3 player and
there has normal battery in the player
(non rechargeable battery), you
should remove the battery from the
MP3 player then connect it to the
USB interface. Otherwise, it may
cause battery burst.
When in USB play mode, be sure
not to remove the USB driver from
the USB interface.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marquant MCR1302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marquant MCR1302 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info