292906
8
Zoom out
Zoom in
Previous page
1/20
Next page
3. FEINEINSTELLUNG IHRES MARMITEK XCAM2-SETS
Normalerweise funktioniert das drahtlose GigaVideo Set am Besten, wenn die Antennen von Sender
[A] (Kamera) und Empfänger [D] aufeinander weisen. Manchmal können jedoch Störsignale im
Haus das Funktionieren der Signale beeinträchtigen. Eine andere Einstellung der Antenne von
Kamera bzw. Empfänger kann hier Abhilfe schaffen, so daß Sie das beste Signal erhalten.
Wenn Sie überhaupt kein Signal empfangen:
Kontrollieren Sie ob der Empfänger an den Stromkreis angeschlossen ist und ob der Schalter auf ON
steht [E].
Kontrollieren Sie, ob die Kanaleinstellung (gekennzeichnet A-D) auf Kamera [B] und Empfänger [I]
gleich eingestellt ist.
Bei geringer Signalstärke oder Störungen
Probieren Sie eine andere Kanaleinstellung auf beiden Teilen. Stellen Sie zuerst einen anderen Kanal
auf dem GigaVideo Empfänger ein (A-D). Auf der Kamera stellen Sie einen anderen Kanal ein,
indem Sie die Gummikappe [B] an der Vorderseite der Kamera entfernen und dann die
Kanaleinstellung ändern. Empfänger und Kamera müssen auf den gleichen Kanal eingestellt sein.
4. ZUSÄTZLICHE MÖGLICHKEITEN
Sie können Ihr XCAM2 System mit mehreren, gesondert erhältlichen Kameras erweitern
(Art.Nr. 09185). Sie können auf den Empfänger maximal bis zu 16 (!) Kameras anschliessen. So
bauen Sie schnell und einfach ein komplettes Videoüberwachungssystem ohne dass Sie Kabel
verlegen müssen.
Um mehrere Kameras auf dem Empfänger zu verwenden, sind die Kameras mit XM11 steuerbaren
Netzteilen ausgestattet. Hiermit kann die Kamera Ihrer Wahl fernbedient werden.
8 MARMITEK
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek xcam2 wireless colour camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek xcam2 wireless colour camera in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info