292906
5
Zoom out
Zoom in
Previous page
1/20
Next page
Plus, you can remotely activate the camera of your choice with the included X-10 controllable
power supply (XM11). Enjoy the convenience of controlling all your cameras with only one receiver!
Operating instructions for Remote Controlled Power Supply, Model XM11
The XM11 is used to power and control the XCAM2 wireless camera. Think of the XM11 as an
X10 Module that has a 12V output (to power the XCAM2 Camera)
The XM11 lets you have multiple XCAM2 cameras which all transmit to the same Video Receiver.
You are now able to activate the camera of your choice.
The Marmitek X10 system is used to control the XM11. To do this you need the following
components with your XM11: - 1x Marmitek Transceiver (TM13 or Marmitek Security console)
- 1x Marmitek RF Remote (HR10, 8in1, KR22…)
Installation:
1. Set the House Code dial (A..P) to match the setting on the Transceiver and Remote
2. Set the Unit Code dial (1..16) to a different code for all XM11 units (e.g. 1, 2, 3 and 4)
3. S
et the channel of the XCAM2 camera’s and Video Receiver to the same code (A..D, e.g. all to B)
4.
Plug the XM11and the Transceiver into the mains outlet. You are now able to control the XM11 units
with your remote (the signal is sent from the Transceiver to the XM11 via the existing mains wires)
Use: When you switch on the camera of your choice, the presently active camera will be
automatically switched off.
GROUP FUNCTION OF THE MARMITEK X-10
CONTROLLABLE POWER SUPPLY.
The XM11 power supplies allows the use of multiple camera’s with one single XCAM2 Receiver.
Whenever you select a camera by your remote control, the camera of your choice will be switched
on while the other active camera’s will be switched off.
This switch-off function works in 4 groups of 4:
Group 1 Group 2 Group 3 Group 4
Camera 1 5 9 13
Camera 2 6 10 14
Camera 3 7 11 15
Camera 4 8 12 16
Application examples:
1. When you’ve set one camera to address A1 and a second one to A2, camera 1 will be switched
off as soon as you activate camera 2. Camera 1 or 2 will switch off as soon as address A3 or A4
is activated. This setting within one group is a useful feature when you’ve applied camera’s only
within the code group A1 through A4.
5XCAM2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek xcam2 wireless colour camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek xcam2 wireless colour camera in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info