Manual Marmitek UM7206 (page 5 of 40) (English, German, Dutch, French, Italian, Spanish)

494306

Zoom out

Zoom in

1/40

ENGLISH

5UM7206™

the Marmitek X-10 signals are disturbed by e.g. baby phones which are in TALK mode

(continuous transmission). When these kind of signals are present on the power line it is

possible that the Marmitek X-10 signals will not come through.

5. The mains do not stop at the front door of your home. Everything that is attached to mains

nearby your home can have influence on Marmitek X-10 signals (e.g. heavy machinery).

If you think that your system is influenced by devices out of your house, it is advisable to

install FD10 Phase Coupler/Filter on each phase entering the house. These filters will block

signals coming into or going out of your house, but will also match the impedance for the

mains. Hereby make your house Marmitek X-10 compatible for these units. The FD10’s will

not only filter but will also couple the phases (please see 1).

INSTRUCTIONS FOR USE

INTRODUCTION

Thank you for buying a Marmitek X-10 UM7206 universal receiver. The UM7206 provides the

link between low-voltage appliances and the Marmitek X-10 system. The UM7206 module

receives the X-10 signal via the lighting circuit and switches lights and 24 V DC appliances

with a current up to 5 A. The UM7206 can be set to pulse or continuous contact and can be

controlled remotely with the Marmitek X-10 commands “ON” and “OFF”. The UM7206 is

manually operated via two keys: “ON” (on/test) and “OFF”. The UM7206 also has a built-in

buzzer that produces a sound when the module receives an “ON” signal. The buzzer can, if

preferred be deactivated. If the unit is set to pulse switching with sound, the built-in buzzer

will produce three to four high-pitched bleeps. The module is powered and controlled via the

230V lighting circuit and is fitted with a mains power lead.

INSTALLATION

The module is easy to install. Connect the low-voltage appliance to the two potential-free

(dead) contacts (screw connectors) and then set the address. After connecting the plug to the

mains, the module can be operated both locally and remotely.

1. Using a small screwdriver, set the desired address (e.g. A1).

2. Connect the low-voltage appliance to the screw terminals (max. 24 V DC, 5 A).

3. Activate the UM7206 by connecting the plug to the mains.

4. Adjust the sliding switches to the preferred positions:

Sliding switch Left:

1. Continuous: The module switches on when it receives an ON command, and off when

it receives an OFF command.

2. Momentary: The module switches on for 3 - 5 seconds after receiving an ON command

and then switches off again.

Sliding switch Right:

1. Sounder Only: Only audio signal.

2. Sounder & Relay: Audio signal and relay contact.

3. Relay Only: Only relay contact.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek UM7206 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek UM7206 Manual

Product: