Manual Marmitek TM13 (page 7 of 40) (English, German, Dutch, French, Italian, Spanish)

494277

Zoom out

Zoom in

1/40

FIRST USE OF THE TM13

1. Set the HouseCode (A to P) of the Home Control TM13 Transceiver to the same code

as you have set your other modules. The UnitCode cannot be set and will always be

‘1’. If the TM13 is set to HouseCode ‘P’, all commands from remote controls will be

converted into an X-10 signal over the mains, regardless of the HouseCode. The

HouseCode used will in this case be the same as the HouseCode of the remote con-

trol.

2. Point the antenna upwards.

3. Plug the Home Control TM13 into a socket (preferably in a central location of your

house).

4. Insert the plug of an appliance or light in the module. This can now be controlled

using the ‘1’ button of your remote.

Normally speaking, only one TM13 will be required per installation if wireless controllers

are used that are set to the same HouseCode (Does not apply to TM13EFL). The TM13

includes a so-called ‘collision detection’ system. This prevents problems from occurring

when several TM13 modules are used and it allows expansion of the RF range by using

several TM13 modules that are set to one and the same HouseCode.

The module responds to the following Marmitek X-10 commands: ‘ON’, ‘OFF’ and the

Marmitek X-10 group command ‘All Units Off’.

FREQENTLY ASKED QUESTIONS

What is the reason for modules to switch on/off spontaneously?

It is possible that a Marmitek X-10 System is installed at one of your neighbours using

the same House Code. To solve this problem try to change the House Code of your sys-

tem, or have FD10 Phase Coupler/Filter installed at your incoming mains.

My modules will not respond to my controller.

Make sure that the House Code on all Modules and Controllers are set to the same

House Code (A .. P).

Am I able to increase the range of my remotes by using more Transceivers?

Yes, you can use more than one TM13 Transceiver in your home when the range of your

remotes is not sufficient. The TM13 is using so called collision detection to prevent sig-

nals to be disturbed when more than one TM13 is transmitting. TM13’s will wait for a

quite power line before transmitting their data. To prevent your Marmitek X-10 System

to become slow or to prevent dimming from becoming less smooth, make sure that the

TM13 units are placed as far away from each other as possible.

7TM13™ TRANCEIVER MODULE

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek TM13 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek TM13 Manual

Product: