Manual Marmitek Surround Anywhere 220 (page 10 of 80) (English, German, Dutch, French, Italian, Spanish)

494260

Zoom out

Zoom in

1/80

6. Operating the receiver

As soon as a valid transmitter signal is received by the receiver, the

receiver will output the amplified audio signal to the speaker

outputs. You can change the audio level by adjusting the receiver

volume control.

In order to achieve maximum transmission quality, the transmitter

volume control should be set to match the audio level of your audio

source as follows:

1) Set the receiver volume control to a low level to prevent clipping

inside the receiver.

2) Set your Home Cinema Set to output the maximum audio level that

you will encounter during normal operation.

3) Turn the transmitter level control knob to the position that yields

maximum audio loudness to the speakers without any clipping

(distortion). If the transmitter level is set too low, the dynamics of the

transmission are not fully used. If the level is set too high, audio

clipping (distortion) will occur inside the transmitter.

4) Turn the receiver volume control to a setting that yields the desired

volume from the speakers.

If no audio signal is received for more than 30 minutes, the receiver

will go into standby mode (power-down mode).

Receiver

volume

control

DC 24V

SPEAKER OUTPUTS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Surround Anywhere 220 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek Surround Anywhere 220 Manual

Product: