613395
5
Zoom out
Zoom in
Previous page
1/40
Next page
5 USE
The maximum resolution that can be used is entirely dependent on the HDMI source
and the connected HDMI screens. The resolution of the HDMI source must be set so
that both HDMI screens support it. Check the instructions for the connected HDMI
equipment to verify the maximum supported resolution and how this can be set. Once
all equipment is connected and set in the correct way, switch everything off and then
on again. Select the correct HDMI input on your HDMI screen and you should then see
the same signal on each screen, with the same resolution.
Tip for usage:
Ensure that the HDMI source and screens fully support the HDCP protocol in order to
prevent any problems.
6 FREQUENTLY ASKED QUESTIONS
No (or bad) image and sound
If you see a bad image or no image at all after connecting the HDMI splitter, try to
establish what the problem is by connecting your devices, one by one, to your screen
(TV, monitor or projector). This will allow you to establish whether the problem lies in
the HDMI sources, the HDMI cables, the HDMI splitter or the screen. HDMI equipment
that has not been tested and certified by ATC (Authorized Test Centers) may cause
image and sound problems.
Check whether the Split412/414’s power adapter is connected and plugged in;
Only use High Speed HDMI® certified cables for the best picture and sound
quality;
Do not use HDMI cables that are longer than specified in the technical data;
Check whether the HDMI cables and/or connectors are damaged;
Both the HDMI source as well as your screen must fully support HDMI;
Check whether your HDMI sources and screen support HDCP (High-bandwidth
Digital Content Protection).
No proper 3D picture
Check whether the HDMI source has been set to 3D and/or that this is set to
automatic.
Both the HDMI source as well as the HD screen must support the same 3D
formats.
Check whether the proper 3D picture is reproduced by directly connecting the
HDMI source to the screen with an HDMI cable.
Do you have a question that has not been answered here? Then have a look at
www.marmitek.com
5SPLIT 412/414
ENGLISH
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek Split 414 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Split 414 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info