494259
6
Zoom out
Zoom in
Previous page
1/40
Next page
6 © MARMITEK
OPERATION
Switching ON
1. Turn on the audio source (TV, PC, Radio, CD-/MP3-/MP4-/DVD player) to which the
transmitter is connected. The signal LED [3] on the transmitter will light up (Green).
2. Adjust the volume to the level you desire by pressing the Volume button on the speaker [8]
or turning the volume button of your audio source.
Tip:
- For crystal clear sound, put the volume of the audio source higher and adjust the
volume of the speakers to the desired level.
- Place the speaker on the floor for the best possible sound. Different bases can influence
the sound quality. Experiment at different places to determine the best sound quality.
3. For the best audio reception, you need to tune the set. Therefore put the speaker and
transmitter together (max 7meters in-between). Push the “TUNING” button on the
speaker [7].
Whenever you find frequency jam, move your channel switch from one channel to the other
channel on the back of the transmitter, and then press the “TUNING” button [7] on the
speaker again.
Switching the speaker ON/OFF/Stand-by
Turn the speaker ON/ OFF by pushing the
button at the front of the speaker [6]. The blue
signal LED on the speaker indicates whether the speaker is switched ON or OFF.
Power save function
When the transmitter does not receive any signal or a weak audio signal for 4 minutes it will
automatically switch off. The transmitter will automatically switch on again if a (strong) audio
signal is recognized.
FREQUENTLY ASKED QUESTIONS
No Sound
Ensure;
* the speaker is switched ON (the LED on the speaker is blue).
* the audio source is switched ON and playing (the
LED on the transmitter [3] is green).
* the volume of the audio source and speaker is high enough.
* the power adapter is fully inserted into the wall outlet and the Power connection (DC IN)
on the transmitter [5] and speaker [10].
* the battery capacity is sufficient. Replace with new batteries or connect a power adapter
to the speaker.
Distorted sound
* Press the “TUNING” button [7] on the speaker to tune the right frequency.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek Speaker Anywhere 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Speaker Anywhere 350 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info