122504

Marmitek silverline 8 Manual

4
Zoom out
Zoom in
Previous page
1/32
Next page
4
1. Turn on the device you wish to control (TV, VCR, satellite
receiver, CD etc.).
2. Press and hold SETUP until the LED indicator lights steadily.
Release the SETUP button.
3. Press and release the mode button that matches the device
you want to control (TV, VCR, CD, etc.).
4. Enter the 3 digit code from the Library code tables.
The LED
turns off after the last digit entered.
5. Point the remote at the device and press the POWER button.
Your device should turn off.
6. Turn your device on and press CHANNEL+. If the device
responds, set-up is complete. If some buttons do not operate
your equipment, try one of the other codes for your brand.
NOTES:
For audio and CD use the CD button, for TV the TV button etc.
If your TV, VCR, Satellite receiver does not respond, try the other
codes for your brand. If it still doesn’t respond, try the Code Search
method.
If the LED blinks rapidly when you enter the code, you may have
entered an invalid code. Recheck the code in the code list and try
again.
Using an AUX button to control a second TV, VCR, SAT, CBL or
CD/Audio component:
1. Turn on the equipment you want to control.
2. Press and hold SETUP until the LED indicator lights steadily.
Release Set-up button.
3. Press either AUX button, then press and release the mode
button that matches the equipment you want to control (TV,
VCR, CBL , CD, SAT). The LED blinks once.
4. Enter the 3 digit code from the Library Code Tables. The LED
turns off after the last digit entered.
5. Point the remote at your component and press the POWER
button. Your component should turn off.
6. Turn your component on and press CHANNEL+. If it responds,
set-up is complete. Your AUX button is now equal to a TV,
VCR, CBL, SAT or CD button, depending on what mode you
chose at step 3.
Searching for codes:
When your device cannot be found in the code list, or your device
doesn’t respond to any of the codes you entered, you can try to
find the code you need by using the ‘searching for codes’
method:
1. Turn on the device you want to control.
2. Press and hold SETUP until the LED indicator lights steadily.
Release Set-up button.
3. Press the mode button that matches the equipment you wish
to control. The LED blinks once.
E
NGLISH
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek silverline 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek silverline 8 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info