494278
12
Zoom out
Zoom in
Previous page
1/41
Next page
8. TEMPO
Sous-menu : TEMPO ENTREE Le délai que vous avez pour désactiver le système après être entré
dans votre maison. (8.1)
TEMPO SORTIE Temporisation avant que le système soit activé en sortant de la maison. (8.1)
TEMPO NUM. Temporisation avant que le système appelle un numéro de téléphone préprogrammé
en cas d’alarme (8.1)
9. PROG TIMER
Sous-menu : NOUV. TIMER effectuer un nouveau réglage de minuterie (7.8)
3. INSTALLATION DES TELECOMMANDES
3.1 Télécommande porte-clés KR21
1. CONTROLE INDICATOR
Est allumé lorsque, en appuyant sur les touches, la télécommande émet
des signaux radio. Lorsque le voyant de l’indicateur luit faiblement, il
faut changer les piles.
2. ARM
Active le système d’alarme avec la fonction ARM AWAY (tous les
détecteurs sont activés).
3. DISARM
Désactive le système de sécurité.
4. LIGHTS ON Votre module d’éclairage est activé (7.5).
5. LIGHTS OFF Votre module d’éclairage est DESACTIVE (7.5)
7+8. PANIC
En appuyant simultanément sur les touches (rouges) 7 et 8, l’alarme
panique est directement activée (6.2).
9. COMPARTIMENT A PILES
Le compartiment à piles se trouve à l’intérieur de la télécommande.
3.1.1 Mise en service de la télécommande porte-clés
1. PILES
La télécommande KR21 est fournie avec des piles chargées.
2. ACTIVER LA TELECOMMANDE KR21
Appuyez pendant 4 secondes sur la touche ARM de la télécommande. Lâchez la touche. La télécommande s’est à présent
choisie un code unique qui peut être initialisé pour que la console le reconnaisse.
En appuyant sur la touche ARM, l’indicateur DEL doit clignoter rapidement plusieurs fois. Si l’indicateur DEL ne fait que
S’ALLUMER, vous devez de nouveau activer la télécommande KR21.
3.1.2 Initialiser la télécommande porte-clés
1. Pour avoir accès au menu, appuyez sur la touche menu
ou menu
. L’écran indique alors « ENTRER CODE »
2. Entrez votre code d’accès PIN de 4 chiffres (réglage usine 0000. Voir 8.3 pour modifier le code PIN). Après chaque chiffre
introduit, un * apparaît sur l’écran.
3. Lorsque le code PIN est correctement enregistré, le mot INSTALL apparaît sur l’écran.
4. Appuyez sur OK. L’écran indique « INSTALL ZONE ».
5. Appuyez sur la touche ARM de votre télécommande porte-clés. La console émet un bip de confirmation.
Le texte « TCDE 1 PROG » apparaît sur l’écran.
GENERALITÉS
12
HAIBRAIN
5
8
9
3
1
2
4
7
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek SafeGuard SC9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek SafeGuard SC9000 in the language / languages: French as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marmitek SafeGuard SC9000

Marmitek SafeGuard SC9000 User Manual - English - 40 pages

Marmitek SafeGuard SC9000 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info