Manual Marmitek MT20 (page 5 of 112) (English, German, Dutch, French, Italian, Spanish)

494266

Zoom out

Zoom in

1/112

MT20™

ENGLISH

HOW DOES MARMITEK X-10 WORK?

Marmitek X-10 components use the existing mains wiring to communicate (using

Marmitek X-10 signals). You can build a complete system using the three different

kind of components of the Marmitek X-10 System:

1. Modules: These components will receive Marmitek X-10 signals and will

switch or dim the attached lamp or appliance. Examples of these modules are lamp

modules and appliance modules. These are available as build-in, micro, DIN rail and

plug-in modules.

2. Controllers: These components will transmit Marmitek X-10 signals and

thus will control the Modules.

3. Transmitters: Wireless components like remotes. The signals of these

components will be received by a controller with transceiver functionality (IRRF 7243,

TM13 or CM15Pro). The Transceiver will translate the signals into Marmitek X-10

signals on the power line.

ADRESSES

Up to a maximum of 256 different addresses can be preset. These are subdivided into

a so-called HouseCode (A to P incl.) and a UnitCode (1 to 16 incl.). The HouseCode

can also be set on the controllers, so that the controllers and modules become part of

the same system. The address can be set either using code dials or by pressing

buttons, depending on the type of module.

The Marmitek X-10 System uses standard commands, which control all units with the

same HouseCode at the same time (e.g. all lights on, all off, etc.).

SIGNAL RANGE

Range of Marmitek X-10 signals over the Power Line and how to increase the

range.

The Marmitek X-10 System is based on power line communication. The range of the

Marmitek X-10 signals very much depends on the local circumstances. On average the

range is a cable length of 80 meters.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MT20 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek MT20 Manual

Product: