494268
30
Zoom out
Zoom in
Previous page
1/40
Next page
LA PROGRAMMAZIONE DEL CODICE CASA
A differenza della maggior parte dei Moduli Marmitek X-10, l’MS13 non ha le rotelline per il codice.
Premere il tasto <house/on> e tenerlo premuto.
Il LED rosso lampeggia.
Dopo 3 secondi il LED mostra il codice correntemente impostato (l’impostazione di fabbrica è A).
Il LED lampeggia una volta per A.
Il LED lampeggia due volte per B.
• …
Il LED lampeggia 16 volte per P.
Rilasciare il tasto <house/on>.
Premere il tasto <house/on> tante volte quanto corrisponde con il codice casa da regolare.
A conclusione dell’inserimento del codice tener premuto il tasto (ad es. per il codice casa C si preme il
tasto <house/on> 3 volte; alla terza volta si tiene premuto il tasto).
Dopo 3 secondi il LED mostra l’impostazione nuova. Se si esita troppo a lungo, o nel caso di un altro
errore, il LED rosso lampeggerà a brevi intervalli. In questo caso le modifiche non vengono accettate e
occorre cominciare da capo.
LA PROGRAMMAZIONE DEL CODICE UNITÀ
Premere il tasto <unit/off> e tenerlo premuto.
Il LED rosso lampeggia.
Dopo 3 secondi il LED mostra il codice correntemente impostato (l’impostazione di fabbrica è 1)
Lampeggiare 1 volte per 1.
Lampeggiare 2 volte per 2.
• …
Lampeggiare 16 volte per 16.
Rilasciare il tasto <unit/off>.
Premere tante volte il tasto <unit/off> quanto corrisponde con il codice unità da regolare. A conclusione
dell’inserimento del codice tener premuto il tasto (ad es. per il codice unità 3 si preme il tasto <unit/off>
3 volte; alla terza volta si tiene premuto il tasto).
Dopo 3 secondi il LED mostra la nuova regolazione. Se si esita troppo a lungo o nel caso di un altro errore,
il LED rosso lampeggerà a brevi intervalli. In questo caso le modifiche non vengono accettate e occorre
cominciare da capo.
REGOLAZIONE DEL SENSORE PER LA MODALITÀ GIORNO/NOTTE
Premere 1 x il tasto <unit/off>.
Il LED rosso lampeggia brevemente.
Premere il tasto <house/on> e tenerlo premuto.
Il LED verde dietro la lente PIR si accende.
Dopo 3 secondi il LED mostra la modalità correntemente regolata (l’impostazione di fabbrica è 1).
Il LED lampeggia 1 volta: rilevatore di movimenti acceso di giorno, il sensore luce/buio spento.
Il LED lampeggia 2 volte: rilevatore di movimenti spento di giorno, il sensore luce/buio spento.
Il LED lampeggia 3 volt: rilevatore di movimenti acceso di giorno, il sensore luce/buio acceso.
Il LED lampeggia 4 volt: rilevatore di movimenti spento di giorno, il sensore luce/buio acceso.
Rilasciare il tasto <house/on>.
Premere il tasto <house/on> tante volte quanto corrisponde con la modalità da regolare. A conclusione
dell’inserimento del codice, tener premuto il tasto (ad es. per la modalità 3 si preme il tasto
<house/on> 3 volte; alla terza volta si tiene premuto il tasto).
Dopo 3 secondi il LED mostra la nuova regolazione ed il LED verde si spegne.
30 © MARMITEK
manual MS13 05-12-2006 09:54 Pagina 30
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek MS13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MS13 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info