613358
6
Zoom out
Zoom in
Previous page
1/44
Next page
6 © MARMITEK
6. USAGE
1. Switch on the HDMI source (e.g. TV Decoder or Media Centre PC).
2. Switch on the display device (for instance HDTV or projector) and
select the appropriate input. Usually you will do this by pressing the A/V
or EXT button of your remote control.
3. You will receive images from the connected A/V device immediately.
4. The MegaView 81 can also be used to operate the HDMI source from
another room, by pointing your own remote control at the IR receiver
and pressing a button.
7. FREQUENTLY ASKED QUESTIONS
Bad (or no) image and sound
x Check if the A/V device is switched on.
x Use only CAT5e/CAT6 cable as specified in chapter 3 (CAT5e Cable
Requirements).
x Check if the CAT5e/CAT6 cable provides a solid connection (no cable
faults).
x Check if the RJ-45 has been connected according to the EIA/TIA
T568B standard.
x Please ensure that the maximum cable length is not exceeded.
x Install your system as far away from any RF sources (wireless devices)
as possible.
x Set a low resolution on your HDMI source. The CAT5e/6 cable used
probably cannot deal with the higher resolution bandwidth.
Do you have any questions that are not answered above?
Please check www.marmitek.com.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek MegaView 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MegaView 80 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info