613362

Marmitek MegaView 60 Manual

5
Zoom out
Zoom in
Previous page
1/44
Next page
ENGLISH
5MegaView60/61™
5. Connect the power adapter [5] to the ‘DC/5V’ connection on the MegaView60/61 receiver
(HDMI Receiver) and plug the adapter into a socket.
INSTALLATION IR (INFRARED) RETURN (MEGAVIEW61 ONLY)
1. Position the MegaView61 transmitter at an accessible location behind or next to your
HDMI devices and close to a wall socket. Please take into account the cable length of the
IR LEDs and make sure that the connections remain accessible.
2. Plug the required IR Extender cable (with the 2 IR LEDs) [6] into the MegaView61
transmitter.
• Self-adhesive foil has been supplied with the IR LEDs. This allows you to attach the IR
LEDs to the IR sensor of your A/V device.
• Test the position and operation of the IR LEDs before sticking them definitively to the IR
sensor of your A/V device.
• In case you want to operate another device besides your A/V device (of which you are
transmitting the signal), you may use the second IR LED for this.
• If you are only using one of the two IR LEDs, please leave the second IR LED unused.
Never remove it from the extender cable!
3. Now connect the IR Receiver [7] to the MegaView61 receiver.
• Position the supplied IR receiver in sight of your infrared remote control and as little as
possible in the proximity of potential sources of interference such as direct sunlight,
strip light, energy saving bulbs, etc. By using the supplied self-adhesive strip, placement
is possible almost everywhere. Please experiment with the right positioning before
definite attachment of the IR receiver.
• Attention! The adhesive strip may cause discolouration on certain surfaces or leave
behind traces of glue.
4. Connect the power adapter [5] to the “POWER” socket of the MegaView61 receiver and
plug the adapter into a wall socket.
5. USAGE
1. Switch on the HDMI source (e.g. HD set-top box or multi media PC).
2. Switch on the display device (for instance HDTV or projector) and select the appropriate
input. Usually you will do this by pressing the A/V or EXT button of your remote control.
3. You will receive images from the connected A/V device immediately.
4. With the MegaView61 you may now also operate the connected device from this room
using your own remote control, by pointing it at the IR receiver.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek MegaView 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MegaView 60 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info