613364

Marmitek MegaView 51 Manual

5
Zoom out
Zoom in
Previous page
1/44
Next page
5
Megaview50 & 51
ENGLISH
3. Connect the MegaView50/51 receiver (Audio/Video Receiver) to your display device
[2] (for instance TV or projector) using a cinch cable (not included).
Please make sure that the colours of the plugs correspond to the input sockets. That
means red to red, white to white and yellow to yellow.
4. Use a CAT5 Ethernet cable (not included) to connect the MegaView50/51 transmitter
and receiver to each other [3].
INSTALLATION IR (INFRARED) RETURN (MEGAVIEW51 only)
1. Position the MegaView51 transmitter at an accessible location behind or next to
your A/V devices and close to a wall socket. Please take into account the cable
length of the IR LEDs and make sure that the connections remain accessible.
2. Plug the required IR Extender cable (with the 2 IR LEDs) [4] into the MegaView51
transmitter.
• Self-adhesive foil has been supplied with the IR LEDs. This allows you to attach the
IR LEDs to the IR sensor of your A/V device.
• Test the position and operation of the IR LEDs before sticking them definitively to
the IR sensor of your A/V device.
• In case you want to operate another device besides your A/V device (of which you
are transmitting the signal), you may use the second IR LED for this.
• If you are only using one of the two IR LEDs, please leave the second IR LED
unused. Never remove it from the extender cable!
3. Now connect the IR Receiver [5] to the MegaView51 receiver.
• Position the supplied IR receiver in sight of your infrared remote control and as
little as possible in the proximity of potential sources of interference such as direct
sunlight, strip light, energy saving bulbs, etc. The infrared indicator LED in the IR
receiver will light up or blink when it receives infrared communication. Use this
indicator LED to position the IR receiver at the most interference-free location
(indicator LED will not or hardly light up when it does not receive a signal).
• By using the supplied self-adhesive strip, placement is possible almost everywhere.
Please experiment with the right positioning before definite attachment of the IR
receiver.
• Attention! The adhesive strip may cause discolouration on certain surfaces or
leave behind traces of glue.
4. Connect the power adapter [6] to the “POWER” socket of the MegaView51 receiver
and plug the adapter into a wall socket.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek MegaView 51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MegaView 51 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info