Manual Marmitek MegaView 20 (page 7 of 56) (English, German, Dutch, French, Italian, Spanish)

613348

Zoom out

Zoom in

1/56

Tips:

• Make sure the connectors are fitted properly to the coax cable.

• Use high frequency shielded connectors to prevent radiation and

interference.

• Use only broadband amplifiers and splitters with a range of 5-

1000 MHz.

5. SELECTING THE CHANNEL

The added Audio/Video-signal (of for instance a DVD-player or AV-camera)

is converted into a normal TV-channel.

With the MegaView20 you can actually choose every free channel. It is

important to choose a free channel, which is not yet in use by an existing

TV-channel. Which channels are free depends on the incoming antenna sig-

nal. For this, consult the channel chart provided by your cable company, or

if you have your own antenna, the channel overview in your TV-guide.

1. Connect the power adapter to the modulator and plug this in the sock-

et. Turn on the modulator by switching the ON/OFF switch to ON.

2. Take your channel chart and look for two free adjacent channels. Then

you choose the higher of these two channels. Example: when channel

37 and 38 are free, you should choose channel 38. With three free

adjacent channels, you should choose the middle one.

3. Use the CH and the CH keys on top of the modulator to select the

chosen channel. The illuminated digital display on top of the panel

shows this channel.

4. Now switch on the desired A/V device (DVD, VCR, satellite receiver, PC,

camera, etc.).

Turn on the TV, and find the selected channel. How to do this can be read

in the manual of your TV. If you cannot select channels on your TV set,

but only frequencies, you can look this up in the enclosed table in the

back of this manual. This set channel now shows the connected A/V

device and from now on you can watch this on the channel you selected.

ENGLISH

7MEGAVIEW20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MegaView 20 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek MegaView 20 Manual

Product: